806373
16
Zoom out
Zoom in
Previous page
1/148
Next page
16
Installation KIT
Sliding door installation
Push the appliance into the cabinet's compartment
with care (Fig. 5) until you reach stop strip “A”.
You will find the material required for the
installation inside the appliance.
Fig. 5
Open the appliance's door and push in the opposite
direction to the hinge (Fig. 6). Fasten the appliance
with 4 screws, 2 screws on the upper faceplate and
2 on the side corner brace opposite the central
hinge.
Fig. 6
Place runner “A” as per the indications found (Fig.
7) on the inside of the cabinet's door and mark the
place where the screws should be inserted. Bore
holes for the screws. Fasten the runner.
Fig. 7
Open the door of the appliance and of the cabinet
at 90°. Place corner brace “B” (Fig. 8) against the
runner “A”. Ensure that the cabinet's door adheres
well to the appliance's door and mark where the
middle openings are, as shown in the figure (Fig. 8).
Remove corner brace “B” and bore holes for the
screws with a 2 mm Ø drill bit. Place the corner
brace against the runner again and fasten it with the
screws provided.
Fig. 8
If you need to adjust the cabinet's door, use the
lengthwise slot opening in corner brace “B” (Fig.
9).
Fig. 9
Depending on the model, press the cover “D
provided on corner brace “B”.
Fig. 10
The freezer compartment door is installed with 1
swing door hinge, while the refrigerator's door
requires 2 hinges of this same type.
x 4
x 1
x 27 x 2
x 4 x 4
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis ARL 14DS1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis ARL 14DS1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 27.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info