806399
3
Zoom out
Zoom in
Previous page
1/3
Next page
CLEANING AND MAINTENANCE
Make sure that the oven has cooled down before carrying out any maintenance or cleaning. Do not use steam cleaners. Do not
use wire wool, abrasive scourers or abrasive/corrosive cleaning agents, as these could damage the surfaces of the appliance. Wear
protective gloves. The oven must be disconnected from the mains before carrying out any kind of maintenance work.
EXTERIOR SURFACES
Clean surfaces with a damp microbre cloth. If they are very dirty,
add a few drops of pH -neutral detergent. Finish o with a dry cloth.
Do not use corrosive or abrasive detergents. If any of these products
inadvertently comes into contact with the surfaces of the appliance,
clean immediately with a damp microbre cloth.
INTERIOR SURFACES
After every use, leave the oven to cool and then clean it, preferably
while it is still warm, to remove any deposits or stains caused by
food residues. To dry any condensation that has formed as a result
of cooking foods with a high water content, leave the oven to cool
completely and then wipe it with a cloth or sponge. Clean the glass in
the door with a suitable liquid detergent.
ACCESSORIES
Soak the accessories in a washing-up liquid solution after use, handling
them with oven gloves if they are still hot. Food residues can be
removed using a washing-up brush or a sponge.
LOWER THE TOP HEATING ELEMENT (Only in some models)
The top heating element of the grill can be lowered to clean the upper
panel of the oven. Remove the side accessory lateral shelves. Pull
the heating element out a little (1) and lower it (2). To reposition the
heating element, lift it up, pulling it slightly towards you, making sure it
comes to rest on the lateral support (3).
1 2 3
REMOVING AND REFITTING THE DOOR
To remove the door, open it fully and lift the catches, pushing them
forwards until they are in the unlock position (1). Close the door as
much as you can. Take a rm hold of the door with both hands – do not
hold it by the handle. Simply remove the door by continuing to close
it while pulling it upwards at the same time until it is released from its
seating (2). Put the door to one side, resting it on a soft surface.
1
b
a
2
a
b
~15°
Ret the door by moving it towards the oven, aligning the hooks of the
hinges with their seating and securing the upper part onto its seating.
Lower the door and then open it fully. Lower the catches into their
original position (3): Make sure that you lower them down completely.
Apply gentle pressure to check that the catches are in the correct
position.
3
b
a
Try closing the door and check to make sure that it lines up with the
control panel. If it does not, repeat the steps above: The door could
become damaged if it does not work properly.
REPLACING THE LAMP
Disconnect the oven from the power supply, unscrew the cover from
the light, replace the bulb and screw the cover back on the light.
Reconnect the oven to the power supply.
Please note: Only use 20-40 W/230 V type G9, T300 °C halogen bulbs.
The bulb used in the product is specically designed for domestic
appliances and is not suitable for general room lighting within the home
(EC Regulation 244/2009). Light bulbs are available from our After-sales
Service. If using halogen bulbs, do not handle them with your bare hands
as your ngerprints could cause damage. Do not use the oven until the
light cover has been retted.
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The oven is not working. Power cut.
Disconnection from the mains.
Check for the presence of mains electrical power and whether the
oven is connected to the electricity supply.
Turn o the oven and restart it to see if the fault persists.
400011376959
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website docs . whirlpool . eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication
plate.
Model: xxxXXXXxx
X
X
XX
X
X
XXX
X
X
XXX
X
X
X
X
X
X
XX
X
X
X
X
X
X
X
X
X
XX
X
X
X
XXXXXX XXXXXX XXXXX XXXXXXX
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ignis AKH 1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ignis AKH 1001 in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ignis AKH 1001

Ignis AKH 1001 User Manual - German - 3 pages

Ignis AKH 1001 User Manual - Dutch - 3 pages

Ignis AKH 1001 User Manual - French - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info