Manual Ignis AKB 4210 (page 9 of 72) (English, German, Dutch, French, Italian, Spanish)

806398

Zoom out

Zoom in

1/72

Quick guide

CLEANING

AND MAINTENANCE

CLEANING THE COOKING COMPARTMENT WITH THE PYRO CYCLE

EXTERIOR SURFACES

•Clean the surfaces with a damp microfibre cloth.

•If they are very dirty, add a few drops of pH-neutral

detergent. Finish off with a dry cloth.

•Do not use corrosive or abrasive detergents. If any of

these products inadvertently comes into contact with

the surfaces of the appliance, clean immediately with

a damp microfibre cloth.

INTERIOR SURFACES

•After every use, leave the oven to cool and then

clean it, preferably while it is still warm, to remove

any deposits or stains caused by food residues. To

dry any condensation that has formed as a result of

cooking foods with a high water content, leave the

oven to cool completely and then wipe it with a cloth

or sponge.

•Clean the glass in the door with a suitable liquid

detergent.

•The oven door can be removed to facilitate cleaning.

ACCESSORIES

Soak the accessories in a washing-up liquid solution

after use, handling them with oven gloves if they

are still hot. Food residues can be removed using a

washing-up brush or a sponge.

Make sure that the oven has

cooled down before carrying

out any maintenance or

cleaning.

Do not use steam cleaners.

Do not use wire wool, abrasive

scourers or abrasive/corrosive

cleaning agents, as these could

damage the surfaces of the

appliance.

Wear protective gloves.

The oven must be disconnected

from the mains before carrying

out any kind of maintenance

work.

Do not touch the oven during the Pyro cycle. Keep children and animals away from the oven

during and after (until the room has nished

airing) running the Pyro cycle.

This function enables you to eliminate cooking

spatters using a high temperature. At this

temperature, food residues turn into deposits that can

be easily wiped away with a damp sponge once the

oven has cooled down.

If the oven is installed below a hob, make sure that

all the burners or electric hotplates are switched off

while running the self-cleaning cycle.

Remove all accessories from the oven before running

the Pyro function (including the shelf guides).

For optimum cleaning results, remove excessive

residuals inside the cavity and clean the inner door

glass before using the Pyro function.

Then oven has two different pyrolytic cleaning

functions: the complete cycle provides for a thorough

cleaning if the oven is extremely dirty, while the quick

cycle (ECO) is shorter and consumes less energy, thus

making it suitable for use at regular intervals.

Only run the Pyro function if the appliance contains

heavy soiling or gives off bad odours during cooking.

Please note: The oven door cannot be opened while

pyrolytic cleaning is in progress. It will remain locked

until the temperature has returned to an acceptable

level.

Ventilate the room during and after the pyrolytic

cleaning cycle (until the room has been completely

aerated).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ignis AKB 4210 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 39.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ignis AKB 4210 Manual

Product: