Manual Iget Blackview GP2 (page 30 of 48) (English, German, Dutch)

667938

Zoom out

Zoom in

1/48

Installing the NANO SIM and SD card:

Switch your phone off before installing the card.

1. Pull the pin for ejecting the SIM card slot from

the package.and insert it into the hole in the

compartment for the SIM card until until it jups off

from the body of the phone.

2. Gently remove the compartment out of the slot.

3. a)1 MICRO SIM b) 1 NANO SIM or 1 MICRO

SIM and one MICRO SD card aim as shown on the

phone and gently push them into the tray.

4. Put the entire compartment together with the

cards back into the phone.

Charging the battery:

Before putting your phone into service you must

recharge its battery.

1. Connect the adapter to the charger. USB-C can

be rotated from both sides. Yet when attaching the

connector, do not use violence.

2. Connect the charger to the wall outlet.

3. If the battery is fully charged, disconnect the

phone from the charger.

Switching the phone on/ off/ sleep mode:

Make sure that the phone has a SIM card and the

battery is fully charged.

Press the ON button to switch on the phone.

Switch off the phone by pressing ON and select

OFF. Confirm it by pressing OK.

Press shortly ON button to switch the phone over to

the sleep mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Iget Blackview GP2 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Iget Blackview GP2 Manual

Product: