EN
33
2. Flip the SIM or microSD card holders (OPEN
position), insert the cards into the drawers, and
then snap (LOCK) again.
3. You can use 2x NANO SIM and 1x microSD.
4. Then, fasten the cover with all 2 screws using a
screwdriver.
Charging the battery:
Before putting your phone into service you must
recharge its battery for 100%.
1. Connect the adapter to the charger. USB-C can
be rotated from both sides. Yet when attaching the
connector, do not use violence.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the
phone from the charger.
Switching the phone on / off / sleep mode
Make sure that the phone has a SIM card and the
battery is fully charged.
Press the ON button to switch on the phone.
Switch off the phone by pressing ON and select
OFF. Confirm it by pressing OK.
Press shortly ON button to switch the phone over to
the sleep mode.
Safety Precautions:
Do not use your phone while driving
Do not use your phone at the petrol stations.
Hold the phone at least 15 mm from your ear and
body.
The phone produces a bright or flashing light.