EN
33
1. Use your finger slide the phone out of the
compartment for location of SIM cards and
microSD cards.
2. Point the pictures on the sides of the bin a) 2x
NANO SIM b) 1x NANO SIM and 1x microSD card
and gently slide them into the compartment.
3. Put the entire tray together with the cards back
into the phone.
Charging the battery:
Before putting your phone into service you must
recharge its battery for 100%.
1. Connect the adapter to the charger
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the
phone from the charger.
Switching the phone on / off / sleep mode
Make sure that the phone has a SIM card and the
battery is fully charged.
Press the ON button to switch on the phone.
Switch off the phone by pressing ON and select
OFF. Confirm it by pressing OK.
Press shortly ON button to switch the phone over to
the sleep mode.
Safety Precautions:
Do not use your phone while driving
Do not use your phone at the petrol stations.
Hold the phone at least 15 mm from your ear and
body.
The phone produces a bright or flashing light.