EN
29
Safety use:
The BV6000/BV6000
S
has an increased resistance.
However, it is not mechanically undestroyable.
The display is made of tempered glass, which
ensures higher resistance. When dropped on a
hard surface or sharp object, it may crack. The
display cracked due to mechanical damage or
improper misuse of the device is not covered by
warranty.
The BV6000/BV6000
S
has the IP68 certification
under 60529/EU standard.
The IP68 protection does not guarantee 100%
resistance to water in all conditions.
We also recommend that you let your phone dry
after contact with water or other liquid.
Be sure to check carefully the closed openings for
the power adapter (USB cable) and headphones. If
moisture enters the device because of
unsatisfactory "closure" of the phone, the warranty
shall not be accepted.
The warranty is not applied to an intentional
damage to the phone.
Installing the SIM/micro card and battery
Switch your phone off before installing the card and
the battery.
1. Unscrew the fastening screws.
2. Open the small back cover of the phone.
3. Remove the rubber cover.
4. Set up the SIM card as shown on the phone and
slide it slightly into the slots of the SIM cards.
