EN
28
and the battery.
1. Remove the back cover and battery.
2. Set up the SIM card as shown on the phone
and slide it slightly into the slots of the SIM cards.
3. Insert the memory card into the slot as shown
on your device.
4. Insert the battery with the contacts facing
against the contacts on the phone. Slide gently
the battery in until it locks. Remember to remove
the cover from the battery contact if it is present.
5. Replace carefully the back cover of the phone,
until you hear, it snaps.
Charging the battery:
Before putting your phone into service you must
recharge its battery.
1. Connect the adapter into the charger. Make
sure that the adapter is inserted in the correct
position. Do not use the force when connecting a
plug.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the
phone from the charger.
Switching the phone on / off / sleep mode:
Make sure that the phone has a SIM card and the