712880

Ideeo SM-0931 Manual

7
Zoom out
Zoom in
Previous page
1/48
Next page
After switching o , always wait until the motor has come to a complete ✦
standstill. Do not touch any moving parts.
Always remove the plug from the wall socket ✦
after use, ✦
in case of any malfunction, ✦
before cleaning the appliance. ✦
During operation, the appliance should be placed on a scratch-resistant ✦
surface.
Do not operate the appliance if it is stored on the hanging loop. ✦
No responsibility is accepted if damage results from improper use, or if ✦
these instructions are not complied with.
This appliance is intended for domestic use only and not for commercial ✦
applications.
In order to comply with safety regulations and to avoid hazards, repairs ✦
of electrical appliances must be carried out by quali ed personnel,
including the replacement of the power cord. If repairs are needed,
please send the appliance to one of our customer service departments.
The address can be found in the appendix to this manual.
Before using for the  rst time
Before the appliance is used for the  rst time, it must be thoroughly cleaned
as described in the section General Care and Cleaning.
Short-time operation
The appliance is designed to process average domestic quantities of food; it
may be operated without interruption for a maximum of 1 minute, when it
should be allowed to cool down for approximately 5 minutes.
Operating button
The blender is equipped with a 2-position operating button.
Level I (1 dot) - low power
Level II (2 dots) - high power
Operation
Always use a suitable container for operation. A tall container with a  at ✦
base is best.
Push the blender unit down into the ingredients in the bowl before ✦
brie y switching the unit on with the operation button.
Make sure that the unit can rotate freely inside the bowl and is not ✦
blocked during operation.
As soon as the operating button is released, the blender will switch o . ✦
7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideeo SM-0931 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideeo SM-0931 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info