712551
9
Zoom out
Zoom in
Previous page
1/60
Next page
Always start with the largest push-on comb, as this will help you to get a
feel for cutting the hair to the desired length.
For shorter hair-cuts, follow-up with a smaller push-on comb or without
any comb attachment.
Cut from bottom to top with the trimming comb lying against the head;
lead the appliance upwards through the hair, moving it gradually away
from the head at the same time.
For a shaped cut, reverse the appliance and shorten the hair from top to
bottom without a push-on comb.
Care and Cleaning
It is essential to switch o the unit and remove the plug from the wall
socket before cleaning and oiling.
To avoid the risk of electric shock, the appliance must not be immersed in
liquid or even allowed to come into contact with liquid.
Do not use abrasives or harsh cleaning solutions.
If necessary, the housing may be wiped with a dry, lint-free cloth.
Trimming comb and trimming blade
After each use, use the cleaning brush to remove the hair between the
trimming comb and the trimming blade.
The trimming comb and trimming blade can be removed for occasional
thorough cleaning by loosening the  xing screws.
The trimming comb must be  tted in such a way that the curved section
in the centre of the trimming blade is facing towards the unit, i.e. the
groove must remain visible. The trimming comb must be aligned exactly
parallel to the trimming blade. Take extreme care that the trimming
blade does not protrude over the trimming comb. The distance between
the tips of the trimming blade and the trimming comb should be at least
0.3 mm.
After cleaning, and also after the appliance has been used for approx.
20 minutes, put a few drops of acid-free oil between the trimming
comb and the trimming blade and then switch the appliance brie y on
to ensure that the oil is well and evenly distributed. Regular oiling will
guarantee good cutting performance over a long period and thus a long
service life.
When the appliance is not in use, put the protective cover over the
trimming comb.
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideeo HS-0965 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideeo HS-0965 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info