507032
11
Zoom out
Zoom in
Previous page
1/27
Next page
9
USING THE HAND VACUUM
1. Hold the hand vacuum firmly by the handle (4).
2. Move the on/off switch I/0 (2) to the I position. To turn off the vacuum, move the on/off switch to 0.
3. Begin vacuuming.
USE THE CREVICE NOZZLE TO VACUUM CREVICES, CORNERS, ETC.
THE CLEANING BRUSH IS INTENDED FOR VACUUMING UPHOLSTERY, FOR EXAMPLE.
WHILE CHANGING THE ATTACHMENTS, ALWAYS SWITCH THE VACUUM OFF.
CAUTION: The hand vacuum is a powerful device. Make sure that you are holding it firmly;
otherwise it can slip out of your hand and cause an accident.
CLEANING AND CARE OF THE VACUUM AND DUST FILTER
WARNING: Always remove the power plug from the power supply before removing or attaching the dust container
(10).
Make sure to protect your eyes from impurities.
1. To open the dust container, push the unlocking button and pull out the dust container (fig. 1). Take out the dust
filter and put it aside (fig. 2). Empty the garbage from the container and wipe it clean with a dry cloth.
Fig. 1 Fig. 2
2. Check the suction opening (3) in the dust container for blockage and dirt and remove anything found.
3. Remove the large particles of dirt from the filer. WARNING: Do not use a pressure cleaner to clean the filter.
4. Clean the dust filter using cold water and let it dry completely before reinsertion.
5. Reinsert the dust filter into the dust container and attach the container to the vacuum. Always make sure that
the dust container and dust filter are correctly attached and that the locking mechanism is closed.
6. Clean the vacuum with a slightly damp or dry cloth. Then dry it off thoroughly. Clean the ventilation openings for
the drive unit from time to time as well.
7. When cleaning the device, do not use hard brushes, abrasive cleaners, alcohol, petrol or solvents.
8. Do not let any water get inside the device and do not clean it under running water. DANGER OF ELECTRIC
SHOCK!
CAUTION: The suction opening (3) must always be open and must not be plugged. Otherwise
the motor will overheat and can become damaged.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideen Welt ZB 300-258F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideen Welt ZB 300-258F in the language / languages: English, German, Polish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info