507012
9
Zoom out
Zoom in
Previous page
1/27
Next page
7
3. PARTS
4. BEFORE FIRST USE
Attention! The battery should be charged for 12 hours prior to first use. Noncompliance with this
instruction can lead to a shortened battery life.
1. Remove all parts from the packaging and check them for damages. Do not use any damaged parts. Risk of
Injury!
2. To recharge the battery, follow the instructions in the following section “Charging the Battery”.
5. CHARGING THE BATTERY
1. If the clipper functions poorly or if the blades no longer move, the battery needs to be recharged. The battery
must also be fully charged prior to first use. Always recharge the battery fully in order to maintain the life of the
battery. A battery that is not fully charged will shorten the battery life and will reduce the operating time as well.
2. Unwind the adaptor (5) connection cable completely and connect it to the recharging station.
3. Place the hair clipper (3) on the recharging station (4), paying attention to both poles. The hair clipper can only
be placed onto the recharging station in one direction.
4. Connect the adaptor to a suitable power socket.
5. The red recharging indicator light underneath the on/off switch ON/OFF (2) lights up. Make sure that the on/off
switch ON/OFF is in the lower position (OFF position) while the battery is recharging, otherwise the battery will
not be recharged.
6. The charging time for a complete recharging process takes approx. 4-6 hours. The charging indicator light does
not go out when the battery is full.
7. A fully charged battery has an operating time of approx. 40 minutes.
6. USING THE HAIR CLIPPER
Attention! Follow the Safety Instructions carefully as well.
Attention! Before each use, check the device, recharging station and adaptor with connection cable for
damages.
6.1 LUBRICATING THE BLADE
Before cutting hair, put a couple of drops of lubricating oil (6) onto the blades and let the hair clipper run for a few
seconds. Turn the hair clipper off again and wipe off excessive lubricating oil with a cloth.
1. Cutting blade holder
2. On/off switch ON/OFF
3. Hair clipper
4. Recharging station
5. Adaptor
6. Lubricating oil (blade oil)
7. Cleaning brush
8. Comb
9. Hairdresser shears
10. Attachment comb 15 (15 mm)
11. Attachment comb 6 (6 mm)
12. Attachment comb 1 (1 mm)
13. Attachment comb 18 (18 mm)
14. Attachment comb 12 (12 mm)
15. Attachment comb 9 (9 mm)
16. Attachment comb 3 (3 mm)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideen Welt HS329 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideen Welt HS329 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info