67797
44
Zoom out
Zoom in
Previous page
1/57
Next page
Press the FAST FORWARD or REWIND button 1
2
To set the security remote code
until you
reach the first number you want to set. As you press the
Press the CLOCK/RING/CODE button to confirm and the
machine will say the first digit you have set and '2' for the second
machine will say the number and the display on the base will also
digit.
shows it (the code has 3 digits, and the default is 321).
3
Repeat steps 1 and 2 to set the second and third digit for the security
remote code. When you have set all 3 digits the machine will say
the numbers you have set.
Note: If you wish to change the day, clock, ring or security code then just repeat the
same steps as above.
Press the CLOCK/RING/CODE button and the machine 1
will say all settings.
Note: The machine can answer calls after two to ten rings.
If you do not set the number of rings, the machine will answer after five rings.
To check the day, clock, number of rings and security remote code of
your answering machine
40
During standby stage.1
To set ring volume
Press the VOLUME - or + buttons to select volume of ringer.2
The base display will show the setting from r0 to r5, where r0 is off
is changed.
and r5 is the loudest setting.The base ringer will sound as the setting
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IDECT X3i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IDECT X3i in the language / languages: English as an attachment in your email.

The manual is 7,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info