64644
44
Zoom out
Zoom in
Previous page
1/49
Next page
Troubleshooting continue...
Try moving the Handset closer to the Base unit.
Try a different position for the base unit - perhaps
higher, or further from other electrical equipment.
Check that the Base unit’s mains power adapter is
plugged in and power is switched on. The Base unit
needs mains power for normal operation of the phone -
not just for charging the batteries.
Make sure you’re using the telephone line cable that
was supplied with your iDECT X2i. Other telephone
cables might not work.
Check that you have not set the ringer volume to Off.
See Section 4 for more information.
Check that the total REN value of all equipment
connected to your telephone line is no more than 4.
Disconnect one or more telephones and see whether
that helps.
Move the Handset closer to the Base unit before you try
again to make a call.
Move the Handset closer to the Base unit, or to a
different position.
Try moving the Base unit so that it’s not near other
electrical equipment, such as a TV or a computer.
If you are using a routing box (smart socket), try
disconnecting it then making a call. If the sound is OK
without the routing box, that’s the cause of the problem.
You’ll get the best results if you site the Base unit as
high as possible. For example, in a two-story house,
the first-floor landing is an ideal place for the base unit.
The strange noise is caused by interference. Disconnect
the mains power lead from the back of the Base unit,
then wait for 30 seconds before reconnecting it.
“When I press keys on
Handset, digits appear
on the LCD screen, but
I can’t make an outside
call.”
“The phone does not
ring.”
“My call was cut off
when I went out of
range. Now I can’t
use my handset.”
“There is interference,
noise or echoing on
the line.”
“When I press the
PHONE or SPEAKER-
PHONE button, I hear
a loud noise.”
line
35
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IDECT X2i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IDECT X2i in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info