615930
41
Zoom out
Zoom in
Previous page
1/48
Next page
中文
电池盖螺丝
电池盖
背光
指示符
设置
指示符
选择语
音端口
选择视
频端口
选择数
据端口
电池电量低
指示符
电源
要取出/放入电池:
拆除电池盖螺丝,然后拆除测试仪背面的电池盖。
取出/放入电池时应小心,务必正确连接且不要缠住
线缆。
装回电池盖和螺丝。
要启动测试仪:
按下“开/关”按钮
o 显示屏上显示所选的端口(语音、视频或数据)。
o 如果显示电池电量低指示符,应使用新的 9V 电池
进行更换。
双端口远端模块可以存放在测试仪的下部,带有用于防护的内部插孔,或用于不从
测试仪上取下便可检测跳线的外部插孔,并可提供对同轴电缆远端模块的存放。
终端模块编号
识别器指示符
远端模块
指示符
连接
要连接线缆并确认连接正:
按照线缆接头类型使用正确的端口(语音、视频或数据)。 (语音端
口用于带有 RJ11RJ12RJ14 RJ25 插头的线缆;视频端口用
带有 F Ω 型端子的同轴电缆;数据端口用于带有 RJ45 插头的线
缆)。
按下对应的端口按钮(语音、视频或数据)。
o 显示屏上显示所选的端口。
将线缆的一端连接到测试仪上的特定端口,然后将另一端连接到远端
模块(用于线缆识别和检测)或识别器(仅用于线缆端口识别)。
o 显示屏上显示接线端子的类型(远端模块或识别器)及其编号,以
便在使用许多不同的接线端子时加以识别。
终端模块
同轴电缆远端模块
1 号(标准)
1 号至 12 号(可选
- 158053
RJ45 远端模块
1 号至 12 号(可 -
158050
RJ45 识别器
1 号至 24 号(可 -
158051
双端口远端模块
1 连接
要连接线缆并确认连接正
确…
o 按照线缆
接头类型
使用正确
的端口
(语音、
视频或数
据)。
(语音端
口用于带
RJ11
RJ12
RJ14
RJ25
头的线
缆;视频
要控制背光:
反复按下“工具”按钮,直到“背光”指示符闪烁。
按下 和背光超时(秒)所示
o 如果为零,显示屏上显,且背光将不会亮起
o 如果不为零,显示屏上显示 光将在按下任一按钮时亮起,并会在不工作一段时间后首先变暗,然后熄灭,以
尽量延长电池寿命。
反复按下“工具”按钮,直到“设置”指示符消失
要关闭测试仪:
按下“开/关”按钮。
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks VDV II Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks VDV II Plus in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info