Manual Ideal Networks SignalTEK CT (page 61 of 74) (English, German, French, Italian, Portuguese, Spanish)

615934

Zoom out

Zoom in

1/74

1 SignalTEK CT 156840.02

SignalTEK CT

User Guide

Guide d’utilisation

Bedienungsanleitung

Guida utente

Manual de usuario

Guia do Usuário

用户指南

156840.02 (06/2015)

IDEAL INDUSTRIES LTD.

Stokenchurch House

Oxford Road

Stokenchurch

High Wycombe

Buckinghamshire

HP14 3SX UK

www.idealnetworks.net

156840.02 SignalTEK CT 2

English

Français

Deutsch

Italiano

Español

Português

中文

The information contained in this document is the property of IDEAL INDUSTRIES Ltd. and is supplied

without liability for errors and omissions. No part of this document may be reproduced or used except as

authorized by contract or other written permission from IDEAL INDUSTRIES Ltd. The copyright and all

restrictions on reproduction and use apply to all media in which this information may be placed. IDEAL

INDUSTRIES Ltd. pursues a policy of continual product improvement and reserves the right to alter without

iPhone® and iTunes® are trademarks of Apple Inc., registered in the U.S. and other countries. Google

Play™ and Android™ are trademarks of Google, Inc.

Die Informationen in diesem Dokument sind das Eigentum von IDEAL INDUSTRIES Ltd. und werden ohne

Gewährleistung der Vollständigkeit oder Korrektheit gegeben. Dieses Dokument darf nur soweit vertraglich

oder anderweitig schriftlich von IDEAL INDUSTRIES Ltd. Zugesichert ganz oder teilweise vervielfältigt

werden. Das Urheberrecht und alle Einschränkungen zur Vervielfältigung und Nutzung gelten für alle

Datenträger, auf denen diese Informationen gespeichert werden können. IDEAL INDUSTRIES Ltd. bemüht

sich um ständige Produktverbesserungen und behält sich das Recht vor, die Spezifikation, das Design, den

Preis oder die Lieferbedingungen jeglicher Produkte oder Dienste ohne Vorankündigung zu ändern. Alle

Rechte vorbehalten.

iPhone® und iTunes® sind in den USA und anderen Ländern eingetragene Marken von Apple Inc. Google

Play™ und Android™ sind Marken von Google, Inc.

Le informazioni contenute nel presente documento sono di proprietà di IDEAL INDUSTRIES Ltd. e sono

fornite senza alcuna responsabilità relativa a errori e omissioni. Sono vietati la riproduzione o l'uso di tutto il

documento o parte di esso, salvo se autorizzati da contratto o permesso scritto di IDEAL INDUSTRIES Ltd.

Il copyright e tutte le limitazioni sulla riproduzione e l'uso si applicano a tutti i supporti nei quali le presenti

informazioni possono essere contenute. IDEAL INDUSTRIES Ltd. segue una politica volta al

miglioramento continuo dei prodotti e si riserva il diritto di modificare senza preavviso le specifiche, il

iPhone® e iTunes® sono marchi di Apple Inc., registrati negli Stati Uniti e in altri Paesi. Google Play™ e

Android™ sono marchi di Google, Inc.

La información que figura en este documento es propiedad de IDEAL INDUSTRIES Ltd., quien no asume

responsabilidad alguna sobre posibles errores u omisiones que puedan existir en este documento. Queda

prohibida la reproducción parcial o total de este documento, así como darle un uso distinto al autorizado

mediante contrato o autorización escrita por parte de IDEAL IDUSTRIES Ltd., independientemente del

formato y soporte de los contenidos. IDEAL INDUSTRIES Ltd. sigue una política de mejora continua del

producto y nos reservamos el derecho de modificar sin previo aviso las especificaciones, diseño, precio o

iPhone® e iTunes® son marcas comerciales de Apple Inc., registradas en los EE. UU. y en otros países.

Google Play™ y Android™ son marcas comerciales de Google, Inc.

As informações contidas neste documento são de propriedade de IDEAL INDUSTRIES Ltd. e são

fornecidas sem responsabilidade sobre erros e omissões. Nenhuma porção deste documento pode ser

reproduzida ou usada exceto quando autorizada mediante contrato ou outra permissão por escrito da

IDEAL INDUSTRIES Ltd. Os direitos de cópia e restrições de reprodução e uso são aplicáveis a todas as

mídias nas quais estas informações possam ser colocadas. A IDEAL INDUSTRIES Ltd. segue uma política

de melhora contínua do produto e se reserva ao direito de alterar sem aviso prévio as especificações,

design, preço ou condições de fornecimento de qualquer produto ou serviço. Todos os Direitos

Reservados.

iPhone® e iTunes® são marcas registradas da Apple Inc. nos EUA e em outros países. Google Play™ e

Android™ são marcas registradas da Google, Inc.

本文档所包含的信息是美国理想工业公司 (IDEAL INDUSTRIES Ltd.) 的财产，对于本文档中出现的错误或

遗漏，提供方概不负责。除非得到美国理想工业公司的合同授权或其他书面许可，否则，本文档的任何部

分均不得复制或使用。版权和对复制和使用的所有限制都适用于本信息发布的一切媒介。美国理想工业公

司奉行持续改进产品的政策，并保留在不事先通知的情况下变更任何产品或服务的规格、设计、价格或供

iPhone® 和 iTunes® 为苹果公司在美国及其他国家/地区的注册商标。Google Play™ 和 Android™ 为谷歌公

司的商标。

Les informations dans ce document sont la propriété de IDEAL INDUSTRIES Ltd. et elles sont

fournies sans responsabilité pour les erreurs et les omissions. Aucune partie de ce document ne doit

être reproduite ou utilisée, sauf en cas d’autorisation par contrat ou en cas d’autre autorisation écrite

donnée par IDEAL INDUSTRIES Ltd. Le copyright et toutes les limitations concernant la reproduction

et l’utilisation s’appliquent à tous les supports sur lesquels cette information peut être placée. IDEAL

INDUSTRIES Ltd. améliore continuellement ses produits et se réserve le droit de modifier sans

préavis la spécification, la conception, le prix ou les conditions de fourniture d’un produit ou d’un

iPhone® et iTunes® sont des marques déposées d'apple inc., enregistrées aux usa et dans d'autres

pays. Google play™ et android™ sont des marques déposées de google, inc.

3 SignalTEK CT 156840.02

INTRODUCTION

Comprehensive testing of installed data cables is essential in order to:

 Prove that the cables are capable of carrying Ethernet traffic, error-free in accordance with the

Ethernet standard

 Prove that they are correctly wired

 Minimise call-backs

Two tests are essential to achieving this quality standard:

 A data test which sends Ethernet traffic over the cable and checks that its performance

complies with the IEEE 802.3ab standard

 A wiremap test which checks that the wiring is free from faults

SignalTEK CT is a Data Cable Transmission Tester that allows you to:

 Perform both of the required tests automatically, measure the cable length, and save the

results, all from a single button press

 Review the results, identify any faults found and re-test after repairs if necessary

 Create and output a report as documented proof that the cables tested are fit for purpose, and

as a record of the length of cable installed

TEST PRINCIPLE

A typical procedure for testing and documenting a number of cables in a job is:

1. Enter into the tester the details of the engineer performing the tests, and your company logo if

required, for inclusion in the final report

2. Enter into the tester the details of the job, including client details as appropriate and cable

Category if required, for inclusion in the final report

3. For each cable to be tested:

a. Connect the SignalTEK CT Test Unit to one end of the cable

b. Connect the SignalTEK CT Remote Unit to the other end of the cable

c. Press the yellow Autotest button on either Unit

d. Allow the two tests to be completed (approx. 20secs total)

e. Move on to the next cable and repeat steps (a) to (d)

4. When all of the cables have been tested:

a. (Optional) Review the results, repair and re-test any faulty cables

b. Plug a USB memory key into the Test Unit

c. Save a full or summary report for delivery to the client

SAFETY INFORMATION

When using SignalTEK CT, always take basic safety precautions to reduce the risk of fire, electric

shock and injury to persons. These include the following:

 When connecting to the line, special care must be taken as high voltages may be present

on the line and there may be a danger of electrocution.

 Avoid using the tester during an electrical storm - there is a remote risk of electric shock

by lightning.

 Use only the mains electricity adaptor supplied with your SignalTEK CT.

DO NOT CONNECT ANY TELECOMMUNICATIONS NETWORK

TO ANY OF THE TESTER’S PORTS

156840.02 SignalTEK CT 4

Test Unit

Remote Unit

USB socket

Used for uploading results and for

downloading user logo and software

updates

Display

Shows settings and results

Function buttons

Press to activate the function shown

in the screen area above the button

Escape button

Press to go back to the previous

screen without saving changes

ENTER button

Press to select the currently

highlighted screen function, or to

confirm changes

Saved LED

Indicates that the result has been

saved in the Test Unit

Charging Indicator LED:

● Charging

○ Charging complete

(Flashing) Not charging

Battery status LED:

● (Power ON) Battery level is

sufficient for use

● (Power ON) Battery charge

level is low but still operational

○ Power OFF

Power button

Press to switch the Remote Unit

ON/OFF

Autotest button

Press to start the Autotest

from the Remote Unit end of

the cable

Link LED

Indicates that the Remote Unit is

connected to the Test Unit

Pass/Fail LED

Flashes to indicate that a test is in progress.

When the test is complete,

indicates the result:

● Test passed

● Test failed

DC Input

Used to connect the

power supply / charger

(12vDC 2.5A)

Rechargeable battery module

(Non-rechargeable backup battery

packs are also available)

Autotest button

Press to start the Autotest

from the Test Unit end of the

cable

Power button

Press to switch the Test Unit

ON/OFF

Cable socket

Used to connect

the units to the

cable to be tested

Ethernet LED

Indicates that

Ethernet is

connected

Activity LED

Indicates Ethernet

data activity

Cursor buttons

Press to change which screen

function or item is highlighted

WiFi Adaptor

Connects to smartphone app

5 SignalTEK CT 156840.02

HOME SCREEN

The HOME screen is displayed following start-up. (To return to the HOME screen from any other

screen, press Escape repeatedly until the HOME screen appears.)

When the Remote Unit Icon is displayed, indicating that the two units are connected together via the

cable to be tested, press Autotest at either end to start the tests.

Memory Status

Shows the number of

results stored / total

capacity

Battery Status:

Battery full

Battery

full

Battery

full

Battery empty

Mains / on charge

Current time

Data Test Icon

Indicates progress of the

Data Test. Highlight the

icon using the cursor

buttons and press Enter to

view the details of the Data

Test.

Cable length

(Indicated

after the tests

are complete)

Notifications Area

Shows the current activity or

status of the tester

Test Unit Icon

Remote Unit Icon

Indicates that the

Remote Unit is

connected to the Test

Unit

Wiremap Test Icon

Indicates progress of the

Wiremap Test. Highlight the

icon using the cursor

buttons and press Enter to

view the details of the

Wiremap Test.

Test Status:

Ready to test

Test in progress

Test Passed

Test Failed

Auto Save Selection

Highlight the icon using the

cursor buttons and press Enter

to select how results should be

saved

JOBS

Press F1 (JOBS) to

access the JOBS menu.

SETUP

Press F3 (SETUP) to

access the SETUP

menu.

Result Name

Shows the name of

the last saved result

Job Selection

Shows the currently

selected Job. Highlight the

icon using the cursor

buttons and press Enter to

select which Job to save

results to.

STOP / SAVE / NAME

Press F2 (STOP) to

interrupt the test, or

(SAVE) to save the result

manually, or (NAME) to

edit the name format of the

subsequent test results

156840.02 SignalTEK CT 6

SETUP

Select SYSTEM to access the system setup:

Enter details of the test engineer and company for inclusion in the reports

Set the menu language

Set preferences for auto off, backlight, length units, date and time format

Set the date and time for inclusion in the reports

Update the software. All settings and results will be lost. Save data to USB first.

View details about the system

Reset to factory defaults. All settings and results will be lost. Save data to USB first.

Adjust the settings to be used in the tests:

Cable Type

Select number of pairs and color scheme:

 If 2-Pair is selected, the Data Test will run at 100Mb/s.

 If 4-Pair is selected, the Data Test will run at 1Gb/s

Shield Type

Select how the shield will affect the Wiremap Test:

 UTP – Wiremap Test will only pass if the cable shield is not connected

 STP– Wiremap Test will only pass if the cable shield is connected

 UTP/STP – Shield will not affect the result of the Wiremap test

Nominal Velocity of Propagation (NVP)

Accurate length measurement relies on correct setting of the Nominal Velocity

of Propagation (NVP) for the cable to be tested.

Shows an illustration of the cable based on the selected cable type

SignalTEK CT can be used together with a compatible tone probe (available from

IDEAL) to identify and trace cables. SignalTEK CT can generate various types of tone on

various combinations of pins. Choice of tone type and pin connection is best determined by

experiment, to achieve the best results with a particular probe type and in a particular cable

situation.

Select the required report style:

 Format

o PDF for graphical reports that can be viewed or printed using a PDF viewer

o CSV for editable reports that can be opened in a spreadsheet

 Size

o FULL to include all details (larger file, takes longer to upload)

o SUMMARY (smaller file, takes less time to upload)

 Include length measurement in the reports if required

7 SignalTEK CT 156840.02

DATA TEST SCREEN

If more detail is required about the Data Test, the Data screen can be displayed by highlighting the

Data Test icon on the HOME screen and pressing Enter.

Summary

Shows the status of the test

Duration

Shows the duration of the test. In order

to comply with the Ethernet standard

at 1Gb/s, the data test must be run for

10 seconds

Test Status:

Ready to test

Test in progress

Test Passed

Test Failed

Notifications Area

Shows details of the test

status

Frames Sent

Shows the number of Ethernet

frames sent over the cable. In

order for the cable to comply

with the Ethernet standard at

1Gb/s, 823,452 frames

(containing 10

bits) must be

sent and received error free

Frames Received

Shows the number of Ethernet

frames received error free

Frame Errors

Shows the number of errored

Ethernet frames received. One or

more errors will cause the cable to

fail the Ethernet standard

Press F2( FAULT) to display possible fault

causes

Possible causes of data test failures include:

 Excessive cable length. The maximum length allowed by the Ethernet standard for 1Gb/s is

100 metres. Cables longer than this may still operate error free, but may be unreliable. Even

cables shorter than this may produce data errors and fail the data test if they have other

faults. If the Data Test fails, check the length of the cable ( shown in the HOME screen and in

the Wiremap result). If the cable exceeds 100 metres in length, it is recommended to replace

it with a shorter one.

 Bad twisting. For optimum performance it is important that the twisting of the individual pairs

is carried right up to the termination, to avoid crosstalk which can affect data performance.

Bad twisting does not show up as a wiremap fault. If the data test fails, it is recommended to

inspect the terminations and re-terminate if the twisting is sub-standard.

 Poor cable quality. Some brands of cable can give inferior data performance and cause

data errors, especially on longer lengths. If the data test fails, but the wiremap test passes,

and the length is approaching 100 metres, it is recommended to check the cable quality

 Split pairs. Split pairs can cause data errors or complete failure of the cable to carry Ethernet

traffic. Cables that are a composite of a long length with no split pairs, connected to a shorter

length with split pairs, may not show up as a wiremap fault but can cause data errors and fail

the data test.

Data errors can occur even if the wiremap shows that the cable is correctly terminated. That is why it

is important to perform both the data test and the wiremap test to prove that the cable meets all of

the required quality standards.

156840.02 SignalTEK CT 8

WIREMAP TEST SCREEN

If more detail is required about the Wiremap Test, the Wiremap screen can be displayed by

highlighting the Wiremap Test icon on the HOME screen and pressing Enter.

Summary

Shows the status or result of the test. In this example, pins 1 and 2 are reversed, resulting in a

miswire fault. Ethernet is tolerant of such a fault, so the Data Test will pass in this case. That is why

it is important to perform both the data test and the wiremap test to prove that the cable meets all

of the required quality standards.

Test Status:

Ready to test

Test in progress

Test Passed

Test Failed

Shows the length of each pair (some

pairs may be longer than the overall

cable due to the cable construction)

Cable Type

Shows cable type selected in

SETUP

Remote Unit pin numbers

Test Unit pin numbers

Shows the overall cable length

Press F3 (SETUP) to adjust the

test settings

Press F1 (RUN) to run the

Wiremap test for

troubleshooting (result can not

be saved)

Press F2 (FAULT) to view the fault details

A split pair is a wiring error in which each pin is connected to the correct pin at the other end of the cable, but

the pairs of pins are connected using wires from different twisted pairs. Split pairs can cause crosstalk and

data failures, but are not reported as faults by simple wiremappers. The advanced wiremapper in SignalTEK

CT can detect split pairs that some other wiremappers can not detect. Split pairs can start with a simple wiring

error. In the example below, pins 3 and 4 are reversed at one end of the cable:





If the error is repaired at end of the cable where the fault is located, the fault is removed:

If the error is repaired at the wrong end of the cable, the end-to-end continuity is corrected,

but a split pair is formed:

This cable may cause Ethernet data errors, and if so it will fail the SignalTEK CT Data Test.

9 SignalTEK CT 156840.02

JOBS

Test results can be organised into folders called Jobs. A maximum of 5000 results can be stored, each

consisting of a Data Test result and a Wiremap Test result, divided into a maximum of 50 Jobs. Jobs can

be uploaded from the tester to a USB memory key and it is recommended to do this regularly to provide a

backup against loss of data.

Following a factory reset a default job “MyJob” is created. To change the name of the Job, press F1 (JOBS)

on the HOME screen then F1 (EDIT). The Job name and up to 8 Information fields can be edited by

selecting the required field with the cursor keys and pressing ENTER. Note that spaces are not allowed in

Job names, and any space that is entered will automatically be converted to an underscore character.

When all of the required details are complete, press F2 (APPLY). The details will be included when the Job

is uploaded to USB.

To create another Job, press F1 (JOBS) on the HOME screen then F2 (OPTIONS). Select NEW and press

ENTER. Fill in the new Job name. The Information fields are automatically copied from the last Job and can

be changed if required.

Select the Job that is to be used as the current Job by highlighting the Job Selection box on the HOME

screen using the cursor keys, pressing ENTER and selecting the required Job.

By selecting the Auto Save box on the HOME screen, the results can be set to save automatically,

manually, or only if the test is passed.

The first time a test is run with a new or empty Job, the result can be saved manually, even if Auto Save is

switched on. This allows the format of the result name to be adjusted and used for all subsequent results.

To adjust the result name, move the highlight to the Result field. The up/down cursor keys can then be

used to increase/decrease the result number or any other numerical part of the result name. Alternatively,

press ENTER to edit the result name. Subsequent tests will use the same result name format, but will

increment the result number, when the result is saved. For example, if the first result name is set to

“Cable0123”, the next result will automatically be saved to “Cable0124” and so on.

To view saved results, press F1 (JOBS) on the HOME screen. The Job list is displayed. Use the cursor

keys to scroll up/down the list to the required Job, then ENTER to display the list of results in the selected

Job. Use the cursor keys to scroll up/down the list to the required result, then ENTER to display the

Wiremap and Data Test information for the currently selected result. Press F1 (RENAME) to edit the name

of the currently selected result. Press F2 (DELETE) to delete the currently selected result. Press F3 to

show ALL results, only PASS results or only FAIL results

If a cable needs to be re-tested, for example if it previously failed but has now been repaired, select the

result in the result list using the cursor keys. Press ENTER. then F1 (RETEST). This returns to the HOME

screen, runs a new test on the cable and automatically saves the result using the selected name,

overwriting the old result.

When a Job is complete, it can be uploaded from the tester to a USB memory key. Select the required Job

in the Job list then press F3 (TO USB). Select the required report style then press F1 (CONFIRM). Insert a

USB memory key and press ENTER. This does not remove the Job from the tester – the Job is only copied

to the USB key and more results can still be added to it later if required. Alternatively, all of the Jobs can be

uploaded at once by pressing F2 (OPTIONS) in the Job screen then selecting ALL TO USB in the Options

screen. This screen also allows all stored Jobs to be deleted.

156840.02 SignalTEK CT 26

SETUP

SYSTEM wählen, um das System-Setup aufzurufen:

Details zum Prüftechniker und der Firma zur Aufnahme in den Bericht eingeben

Menüsprache wählen

Einstellungen für Auto Aus, Displaybeleuchtung, Längeneinheiten,

Datums- und Uhrzeitformat eingeben

Datum und Uhrzeit für die Berichte eingeben

Software aktualisieren. Alle Einstellungen und Ergebnisse werden gelöscht.

Daten zunächst auf USB-Stick speichern.

Angaben zum System

Auf Werkseinstellungen zurücksetzen. Alle Einstellungen und Ergebnisse

werden gelöscht. Daten zunächst auf USB-Stick speichern.

Einstellungen für die Prüfungen ändern:

Kabeltyp

Anzahl der Kabelpaare und Farben wählen:

 Wenn 2-Paar ausgewählt wird, läuft der Datentest mit 100 Mb/s.

 Wenn 4-Paar ausgewählt wird, läuft der Datentest mit 1 Gb/s.

NVP (Ausbreitungsnenngeschwindigkeit)

Die präzise Längenmessung ist abhängig von der korrekten Einstellung der

Ausbreitungsnenngeschwindigkeit (NVP) des zu prüfenden Kabels.

Zeigt das Kabel basierend auf dem ausgewählten Kabeltyp.

SignalTEK CT kann in Verbindung mit einer kompatiblen Tonsonde (erhältlich von IDEAL) zur Identifizierung und

Verfolgung von Kabeln eingesetzt werden. SignalTEK CT kann verschiedene Tontypen auf verschiedenen

Stiftkombinationen erzeugen. Die Wahl des Tontyps und der Stiftverbindung wird am besten durch Ausprobieren ermittelt,

um die besten Ergebnisse für einene spezifischen Sondentyp und in einer bestimmten Kabelsituation zu erzielen.

Den erforderlichen Berichtsstil wählen:

 Format

o PDF für Grafiken, die mit einem PDF-Viewer betrachtet oder gedruckt werden

können

o CSV für Berichte, die in einer Tabellenkalkulation geöffnet und bearbeitet werden

können

 Größe

o VOLL, mit allen Details (größere Datei, Upload dauert länger)

o ZUSAMMENFASS. (kleinere Datei, Upload ist schneller)

 Bei Bedarf wird auch die Längenmessung in die Berichte aufgenommen

Schirmtyp

Auswirkung des Schirms auf den Verdrahtungstest auswählen:

 UTP – der Verdrahtungstest ist nur dann erfolgreich, wenn kein Kabelschirm

angeschlossen ist

 STP – der Verdrahtungstest ist nur dann erfolgreich, wenn der Kabelschirm

angeschlossen ist

 UTP/STP – der Schirm hat keinen Einfluss auf das Ergebnis des Verdrahtungstests

156840.02 SignalTEK CT 38

SCHERMATA TEST MAPPATURA

Se si necessita di maggiori dettagli sul test di mappatura, è possibile visualizzare la schermata Mappatura

evidenziando l'icona Test mappatura nella schermata principale e premendo Enter.

Sommario

Mostra lo stato o il risultato del test. In questo esempio i pin 1 e 2 sono invertiti, con un conseguente errore nel

cablaggio. Lo standard Ethernet non giudica grave questo difetto, quindi in tal caso il test dati viene superato.

Questo è il motivo per cui è importante eseguire sia il test dati che il test di mappatura al fine di verificare che il

cavo soddisfi tutti gli standard di qualità necessari.

Stato test:

Pronto per il test

Test in corso

Test passato

Test fallito

Mostra la lunghezza di ogni coppia (alcune

coppie possono essere più lunghe dell'intero

cavo a causa della struttura del cavo stesso).

Tipo Cavo

Mostra i tipi di cavi selezionati

in SETUP.

Numeri pin unità remota

Numeri pin unità di test

Premere F3 (SETUP) per configurare

le impostazioni di test.

Premere F1 (INIZIA) per

eseguire il test di mappatura

per la risoluzione dei problemi (i

risultati non potranno essere

salvati.)

Premere F2 (ERRATO) per visualizzare i dettagli

del guasto.

Una coppia splittata è un errore di cablaggio secondo cui ogni pin è collegato al pin corrispondente all'estremità

opposta del cavo, ma le coppie di pin sono collegate tramite fili di doppini diversi. Le coppie splittate possono causare

diafonia ed errori di dati, ma non sono rilevate come guasti da semplici dispositivi di mappatura. La funzione di

mappatura avanzata di SignalTEK CT è in grado di rilevare coppie splittate che altri dispositivi non riescono a

individuare. Le coppie splittate possono iniziare con un semplice errore di cablaggio. Nell'esempio seguente, i pin 3 e 4

sono invertiti a un'estremità del cavo:





Se l'errore viene riparato all'estremità del cavo dove è localizzato il guasto, quest'ultimo viene eliminato:

Se l'errore viene riparato all'estremità del cavo errata, la continuità end-to-end viene corretta, ma

si forma una coppia splittata:

Mostra la lunghezza

totale del cavo.

Questo cavo potrebbe provocare errori nei dati Ethernet e in tal caso non supera il test dati

SignalTEK CT.

156840.02 SignalTEK CT 60

RELATÓRIOS

Os relatórios são muito importantes, pois são um documento que comprova que os cabos testados estão

adequados para utilização, e são um registro do comprimento do cabo instalado. Para selecionar o estilo de

relatório desejado, pressione F3(CONFIG) na tela INÍCIO, e selecione RESULTADO.

Para incluir seu próprio logotipo nos relatórios em PDF, na tela INÍCIO, selecione F3

(CONFIG) / SISTEMA / DONO / F1 (LOGO). Insira um dispositivo USB contendo uma

imagem com o nome logo.png, com tamanho máximo de

250 x 160 pixels.

Para incluir seus detalhes nos relatórios, na tela

INÍCIO, selecione F3 (CONFIG) / SISTEMA / DONO.

Para incluir os detalhes do Trabalho nos relatórios, na

tela INÍCIO, selecione F1 (TRABALHOS) / F1 (EDITAR)

ou F2 (OPÇÕES) / NOVO.

Há 3 relatórios disponíveis

O relatório de Resumo lista um resumo de todos os testes em um serviço.

O relatório Sumário lista todos os detalhes de todos os testes.

O relatório Completo combina o relatório de Resumo e o Sumário em um documento

O Test0001 é um cabo 4-Pair 568B UTP de 2

metros de comprimento Ele reprovou o Wiremap

porque o pino 7 está faltando e reprovou os testes

de Dados por não suportar 1Gbit/s. No entanto,

suporta 10Mb/s e 100Mb/s.

O Test0002 é um cabo 4-Pair de 2 metros de

comprimento Passou nos testes de Wiremap e

Dados e suporta 10Mb/s, 100Mb/s and 1Gbit/s.

O Test0003 é um cabo 4-Pair 568A UTP de 2

metros de comprimento com os pinos 1 e 2

invertidos. Foi reprovado no teste de Wiremap,

mas passou no teste de Dados. Como a

reprovação do wiremap não é crítica, ele suporta

10Mb/s, 100Mb/s e 1Gb/s.

O Test0004 é um cabo 4-Pair 568B UTP de 2

metros de comprimento. Passou no teste de

Wiremap, mas reprovou no teste de Dados

porque foram detectados erros de Ethernet. Não

suporta 1Gb/s. Pode suportar 10Mb/s ou

100Mb/s, mas sem garantia.

O Test0005 é um cabo 2-Pair 568A UTP de 2

metros de comprimento. Passou nos testes de

Wiremap e Dados. Suporta 10Mb/s e 100Mb/s

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks SignalTEK CT in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ideal Networks SignalTEK CT Manual

Product: