615949
14
Zoom out
Zoom in
Previous page
1/34
Next page
NaviTEK NT 151844 Iss 2
User Guide Page 14
Power over Ethernet
When an Ethernet link is established, Autotest automatically tests the port for the presence of
PoE and measures the available power by applying a minimum load. Select the PoE field in the
HOME screen and press ENTER to display the PoE screen.
Port Discovery information details
When an Ethernet link is established, Autotest automatically scans the partner port for Link
Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP) and Extreme Discovery
Protocol (EDP) messages when the switch is able to send discovery messages. These
messages may contain various details about the switch and the port connected, depending on
how they are configured. Select the switch / port details field in the HOME screen and press
ENTER to display the port discovery details screen.
Test result
Test type
Select PoE or PoE+ in the test
setup screen
Pair
PoE may be presented on
pairs 12-36, 45-78 or both
Test Data
Shows the voltage, current
under load and power
supplied by the port
Test Status
RUN
Press F1 (RUN) to re-run
the PoE test without
saving a result
SETUP
Press F3 (SETUP) to
access the PoE test setup
screen
In non-standard network
configurations it is sometimes
possible for Discovery Protocol
messages to arrive from devices
other than the directly connected
switch.
In this case, the tester attempts to
resolve which are the messages
from the correct device.
If this is not possible, the tester
reports that multiple devices have
been discovered.
14


Need help? Post your question in this forum.

Forumrules
1

Forum

ideal-networks-navitek-nt-plus

Reset search

  • Hello,

    i have NaviTEK NT Plus and i want to export my jobs, but i cannot.
    When i plug a usb stick and press to usb ,it says please insert usb key ,while i have try with 3 different usb sticks.
    Also i buy a tp-link wifi usb adapter, but i can not install it . How i can do that?
    Can you please help and advise?

    Regards Submitted on 15-4-2021 at 12:07

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks NaviTEK NT Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks NaviTEK NT Plus in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ideal Networks NaviTEK NT Plus

Ideal Networks NaviTEK NT Plus User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info