615941
26
Zoom out
Zoom in
Previous page
1/120
Next page
MC2+—User Guide
EN-12 121800
Static This is used whenever a known static IP address is
assigned. The Subnet Mask and the Gateway should also
be entered. You can also specify up to three DNS
(Domain Name Server) addresses to enable access to
other web servers.The valid IP Address range is from
0.0.0.0 to 255.255.255.255.
Authentication This defines the authentication
protocol for your ISP. The default is
CHAP.
MTU Enter the Maximum Transmission Unit
for the DSL connection. The default is
1500.
On-Demand Select to enable on-demand
connectivity to the internet. Your
internet connection will be
disconnected if no activity is detected
after the specified timeout value. The
default is disable.
Default Gateway Enable to set this connection as the
default gateway in the routing table.
Enforce MTU PPPoE only.
Debug Select to enable PPP connection
debugging facilities.
PPPoE & PPPoA
Settings
Description
Static Settings
Description
Encapsulation LLC and VC are two ways of
encapsulating multiple sessions. If
you are not sure of the settings, leave
it as the default (LLC).
IP Address Enter the static IP address to be
assigned to the WAN interface on the
MC2+. This is provided by your ISP.
Mask The Subnet Mask is used to determine
the Subnet to which the IP address
belongs.
Enter the Subnet Mask to be assigned
to the WAN interface on the MC2+.
The Mask is provided by your ISP.
121800-7.book Page 12 Monday, October 20, 2008 4:11 PM
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks MC2 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks MC2 plus in the language / languages: English as an attachment in your email.

The manual is 5,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ideal Networks MC2 plus

Ideal Networks MC2 plus User Manual - German - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info