615941
21
Zoom out
Zoom in
Previous page
1/84
Next page
Issue 4 - 02/07 EN-13
Using the MC2+ when connected to a PC
English
Bridged You can configure MC2+ to simulate a bridged modem.
In Bridged mode, Ethernet frames are bridged over ATM
Virtual Circuits.The Ethernet frames are encapsulated
using either LLC Encapsulation or VC Multiplexing.
Because the Ethernet packets are bridged, the MC2+ only
has to pass the Ethernet packets to and from the ISP and
the local network. The IP Addresses of the local network
are assigned by the ISP either statically or dynamically.
CLIP Classical IP Over ATM as defined in RFC1577. This
provides the ability to transmit IP packets over an ATM
network. CLIP Encapsulates IP in an AAL5 PDU (Packet
Data Unit) using RFC1577 and it makes use of an ATM
aware version of the ARP protocol.
-4- Enter a unique Connection Name.
This cannot begin with numbers, it must contain
valid characters and no spaces.
-5- Select and enter a VPI and VCI to match the
network settings.
DHCP Settings Description
Encapsulation See Static Settings Table on page
EN 12.
IP Address If your DSL line is connected and your
DSL/ISP supports DHCP, select the
Renew button to retrieve these
settings.
Mask
Gateway.
Default Gateway
Bridged Settings Description
Encapsulation See Static Settings Table on page
EN 12.
CLIP Settings Description
IP Address See Static Settings Table on page
EN 12.
Mask See Static Settings Table on page
EN 12.
ARP Server. If you are not sure of the settings,
leave it as the default
0.0.0.0.
Default Gateway See Static Settings Table on page
EN 12.
121800-4.book Page 13 Monday, March 5, 2007 10:09 AM
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks MC2 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks MC2 plus in the language / languages: German as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ideal Networks MC2 plus

Ideal Networks MC2 plus User Manual - English - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info