615941
14
Zoom out
Zoom in
Previous page
1/84
Next page
MC2+—User Guide
EN-6 121800
PPP/IP
Indicator
LED
When this LED is lit it indicates that a PPP connection has
been established and an IP address has been assigned
successfully to MC2+ from the network.
Note
Not all splitters (microfilters) pass line voltage
information through to the ADSL port.
Reset
Button
This only to be used if MC2+ has malfunctioned.
Connecting MC2+ to a Power Supply
MC2+ can be either battery powered or mains electricity
powered giving total flexibility for most testing sites and
situations. See Batteries on page EN-1 for more
information.
Fitting and Using Batteries
-1- Push the lower end of the tester out of its protective
rubber case.
-2- Remove the battery compartment cover.
-3- Insert 4 x AA batteries.
Warning
Make sure that you insert the batteries correctly.
-4- Refit the battery compartment cover.
-5- Refit the protective rubber case.
-6- Set the power switch to ON .
-7- Make sure that the Power LED is lit.
If the Battery Low Warning LED is lit, see
Batteries on page EN-1 for more information.
Fitting and Using the Mains Electricity Adaptor
-1- Set the power switch to OFF .
-2- Push the mains adaptor supplied into the Mains
Adaptor Connector on MC2+.
-3- Connect the mains adaptor plug to a suitable mains
electricity socket.
-4- Make sure that the Power Indicator LED is lit.
121800-4.book Page 6 Monday, March 5, 2007 10:09 AM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks MC2 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks MC2 plus in the language / languages: German as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ideal Networks MC2 plus

Ideal Networks MC2 plus User Manual - English - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info