615948
105
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 11
LanTEK Firmware Upgrade
104
5. Select Upgrade and follow the instructions until the upgrade is finished.
NOTE:
Upgrade only newer firmware with higher end numbers.
During the upgrade, the connection to the adapter must not be interrupted.
6. Repeat with the remote handset (RH).
or
7. Supply the Remote handset (RH) with power by using the adapter.
8. Connect the Display (DH) and the Remote (RH) handset with a patch cord by using
the test adapters.
9. Press Autotest. The Display Handset (DH) reports the version difference.
10. Open Calibration menu.
11. Enable firmware upgrade with .
12. Confirm update with .
13. Wait until upgrade is finished and normal operating status is displayed on Remote
handset (RH).
11.1.2. Firmware Upgrade with USB Removable Storage
1. Save the firmware upgrade on an empty USB removable storage.
2. Supply the Display handset (DH) with power by using the adapter.
3. Insert the USB removable storage into the USB port of the powered off Display
handset (DH).
4. Power the display handset (DH) on, wait approx. 1-2 seconds, then press and hold
the Escape button until an hourglass appears on the TFT display. Release the
escape button when the hour glass appears.
5. Wait until the upgrade is finished and the main menu appears on the Display
handset.
NOTE:
During the upgrade, the connection to the adapter must not be interrupted.
6. Supply the Remote handset (RH) with power by using the adapter.
7. Connect the Display (DH) and the Remote (RH) handset with a patch cord by using
the test adapters.
8. Press Autotest. The Display Handset (DH) reports the version difference.
9. Open Calibration menu.
10. Enable firmware upgrade with .
11. Confirm update with .
12. Wait until upgrade is finished and normal operating status is displayed on Remote
handset (RH).
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks LanTEK III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks LanTEK III in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info