615948

Ideal Networks LanTEK III Manual

80
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 8
Fiber testing (LWL) FiberTEK™ FDX
79
Only Autotests with the overall evaluation Passed can be automatically saved. Tests with
failure rating must be manually saved.
The test results are automatically saved if Autosave Pref is enabled.
A name is automatically assigned to finished tests if Auto Increment function has been
enabled. If another name is preferred, use option to manually assign another
name.
8.9.3. Manual Saving of Autotest Results (Autosave off)
1. To manually save an Autotest, at the bottom edge of the screen press the soft key
.
2. Now a brief acknowledgement appears, indicating the name under which the test
will be saved.
3. If the current name already exists a warning message appears, asking whether
you want to overwrite the existing file or enter another name.
4. Press Escape to cancel and return to previous display without saving or
to overwrite existing file.
8.9.4. Working with Jobs
The Autotest is saved under an unique name. The test results can be viewed, printed or
deleted on the File screen.
1. On the ready screen, select File option and open job list.
2. Mark the desired job. Use to open the folder containing the option list.
3. Mark the desired function and confirm with Enter.
8.9.5. Display of Result Details
The Autotest is saved under an unmistakable name. The test results can be viewed, printed
or deleted on the File screen.
1. On the ready screen, select File option and open Job List.
2. Mark the desired job. Press Enter to open the job.
3. Use Arrow Keys to mark the desired test record.
4. Press Enter to open the record.
5. Press Escape to return to previous screen at any time.
8.10. FiberTEK™ FDX Measuring Mode
The LanTEK
®
II Cable Tester selects the reference level and test limits based on the test
selected. When testing fibers (LWL), the remote handset (RH) must be manually powered on.
1. Use Arrow Keys to navigate on ready screen to "Fiber" display and confirm with
Enter.
2. Highlight the wavelength, according to fiber to be measured and confirm with
Enter.
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks LanTEK III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks LanTEK III in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info