615947

Ideal Networks FiberTEK III Manual

6
Zoom out
Zoom in
Previous page
1/25
Next page
FiberTEK III Document 164802 Iss 3
User Manual Page 6
Chapter 1. Specifications
Operational Conditions (unless specified otherwise)
1. At 23 ±1 ºC unless otherwise specified.
2. After ten-minute warm-up time.
Testing speed
Autotest 8 seconds for each fiber / fiber pair
(i.e. twice this for a Bi-Directional test)
Input (Meter) connectors
Universal with adaptors for FC, ST, SC and LC
Output (Source) connectors
Universal with adaptors for FC, ST, SC and LC
Fiber type
9/125 μm, 50/125 μm and 62.5/125 μm
Source type and nominal wavelength
MM LED: 850 nm LED and 1300 nm LED
SM Laser: 1310 nm and 1550 nm FP laser
Source wavelengths
MM: 850 ±20 nm
1300 nm -35 to +30 nm
SM: 1310 ±20 nm
1550 nm ±30 nm
Source spectral width
MM LED: Source spectral width (Full-Width
Half-Maximum - FWHM):
35 nm at 850 nm typical
80 nm at 1300 nm typical
Source power in light source mode
MM 850 nm LED: -20 to -23 dBm nominal
With EF mode conditioner: -23 to -26 dBm
nominal
MM 1300 nm LED: -15 to -20 dBm
With EF mode conditioner: -18 to -23 dBm
SM Laser: > -7 dBm
Source power stability
850, 1300 nm LED: ±0.25 dBm over 8 hours
1310, 1550 nm Lasers: ±0.25 dBm over 8
hours
Encircled Flux Compliance
Using optional external mode conditioner,
complies withTIA-526-14-B and IEC 61280-1-4
at the end of the cable
Length measurement
MM LED: 0 – 7,500 m of 50/125 or 62.5/125
μm fiber
SM Laser: : 0 - 20,000 m 9/125 μm fiber
Length measurement accuracy
±1.5 m ±2% of length, 2 m minimum
Power meter type
InGaAs detector
Power meter calibrated wavelengths
MM: 850 nm, 1300nm
SM: 1310 nm, 1550 nm
Power measurement range
0 to -55 dBm (850 nm)
0 to –60 dBm (1300/1310 nm and 1550 nm)
Power measurement uncertainty (accuracy)
±0.25 dB at – 20 dBm, calibration performed
with an FC adaptor
Measurement linearity
850 nm: target ±0.2 dB between 0 and -45
dBm, ± 0.25 dB below -45 dBm
1300/1310 nm and 1550 nm: target ±0.2 dB
between 0 and -55 dBm, ± 0.2 dB below -55
dBm
Display resolution
Power/attenuation: 0.01dB or dBm
Power W: 3 digits
1.00 to 9.99 nW
10.0 to 99.9 nW
100 to 999 nW
1.00 to 9.99 uW
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks FiberTEK III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks FiberTEK III in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info