615947

Ideal Networks FiberTEK III Manual

3
Zoom out
Zoom in
Previous page
1/25
Next page
FiberTEK III Document 164802 Iss 3
User Manual Page 3
Safety Precautions
WARNING!
NEVER look directly into the port of measuring adapter, at connector surface, open fiber ends or into couplers.
There is a risk of light emerging from the fiber that is not visible, which could permanently damage your eyes.
If you are not sure whether the device is switched on or whether the fiber transmits light, for safety reasons always
assume that the device is active.
Handle bare fibers properly; there is a risk of injury from fiber splinters.
Protect your eyes when working with bare fibers; fiber splinters could permanently damage your eyes.
Never let fiber scraps lie openly and never dispose of them loosely in normal waste containers; there is a risk of
injury from fiber splinters.
CAUTION!
When connecting the measuring adapter to a light-conducting line, the maximum measuring range must be
observed (see specifications of individual modules). Exceeding it could result in damages to FiberTEK™ III
modules.
NOTE:
Before connecting cable adapter to FiberTEK™ III adapter, ensure that the plugs of cable connectors are
clean.
Clean ferrules of measuring adapter only with dry, lint-free, non-abrasive materials.
The plugs can be cleaned with suitable fiber cleaning cloths or cleaning pens. IDEAL recommends
cleaning set #1219-00-1621025205 (2.5 mm) and 025204 (1.25 mm) to care for the modules and patch
cord.
Disclaimer
IDEAL INDUSTRIES, LTD. does not assume any liability for death, injury or damage to equipment or
property resulting from improper use of the battery packs.
IDEAL INDUSTRIES, LTD. will not be liable for consequential damages that may result from tampering
with the battery packs or charger or their use thereafter.
Subject to technical changes.
Environmental Protection
If you have any questions concerning these precautions, the operating instructions, or any other
concerns about the safe use and disposal of the battery packs used in LanTEK
®
III, please contact a
representative of IDEAL INDUSTRIES, LTD.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks FiberTEK III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks FiberTEK III in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info