541860
11
Zoom out
Zoom in
Previous page
1/22
Next page
#61-844
ND-7043-3 Page 11 of 22
5.2. Measurement Options
This menu enables the selection of options for temperature measurements. The symbols shown
below indicate the icons shown for Function Key 1 when the various options are selected.
See frequently asked questions for more details of each item.
Cursors
Choose between one or two cursors. When two cursors are chosen, the
temperatures at both cursors and the temperature difference between them
will be displayed. Use Function Key 1 to select one of the cursors, which can
then be moved around on the display by the navigation buttons.
Tracking
Select “High”, Low”, or “High & Low” in order to track and measure the hottest
point, the coldest point, or both hottest and coldest points in the image.
Area
If this option is turned on, the highest, lowest, and average temperatures within the
designated area will be displayed. Three different area size boxes can be selected via
Function Key 1
Note that the above three items are mutually exclusive, i.e. when one is turned on the other two
are disabled.
Isotherms
Select “High”, “Low”, or “High & Low” in order to highlight areas of the scene
with temperatures within one or two temperature bands. The temperature
bands are adjustable by means of Function Key 1 and the navigation Keys.
Temp. Profile
Select “Horizontal or Vertical” to enable a histogram of temperature values
along a horizontal or vertical cross section to be displayed on the right hand
side of the display. The position of the cross section is indicated by small
arrows at the left and right or top and bottom of the image and can be
adjusted by means of Function Key 1 and the navigation buttons.
Temp alarms
Select “High”, “Low”, or “High & Low”. Visual and audio alarms will be
triggered if either cursor or a point within the designated area is higher or
lower than a set temperature. The high and low set temperatures may be
adjusted by means of Function Key 1 and the navigation keys.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal HeatSeeker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal HeatSeeker in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ideal HeatSeeker

Ideal HeatSeeker Quick start guide - English - 2 pages

Ideal HeatSeeker Quick start guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info