666836
15
Zoom out
Zoom in
Previous page
1/24
Next page
15
Eve model 2017 (2.0) manual | Version 1.0 | July 2017
ENGLISH
3. INSTALLING AND CONNECTING
The cable trajectory and the charging station are part

main distributor.
The cable trajectory must be installed in compliance
with the usual locally applying professional standards.
REMARK

installation requirements.
REMARK
The system and cables must be installed based on the
maximum charging rate at the entry or entries of the
charging station. This must assume a continuous load (no
diversity). The cable diameters mentioned in this manual
are indicative. The technician remains responsible for de-
termining the correct cable diameter and compliance with
applicable standards and regulations.
While selecting a location to install the Eve, the following
criteria must be taken into account:
Never install in a potentially explosive atmosphere.

implementing compensating measures.
Always fully comply with local technical requirements
and safety regulations.
The installation site must have a levelled and solid
underground.
Maximum atmospheric humidity of 95%
Ambient temperature of -30 °C to 40 °C.

The recommended installation height is 70 to 120cm
from the ground to the bottom side of the casing.
Ensure that the charging station is located in such a
way that the charging socket is easily reachable with
the charging cable. The charging cable (approx. 5 metre
length) must not be under tension while connected to
the vehicle.
Prevent road users from being able to drive over the
cable.
Prevent pedestrians from being able to trip over cables.
Ensure that the UTP/Ethernet connection on the bot-
tom side of the charging station is covered to prevent
it from being unintentionally disconnected or used by
unauthorised individuals.
3.3 Mechanical installation
Use the following tools and equipment to install the Eve:
Spirit level
Impact drill
Phillips screwdriver
Screwdriver for a terminal block
Pencil and the enclosed drill template
Torx screwdriver (T25)
Wire stripper
Allen wrench
4 x M5 x 30mm screws
4 x M5 x 30mm plugs
4 x M5 rings
Wall mounting: Drill with the drill template
REMARK
Verify the indicated measures with a tape measure.
The distances between the drill holes are 123.8 mm
(top side), 39.6 mm (bottom site) and 434.3 mm (vertical).
1. Cut the drill template from the carton packaging.
2. Place the drill template at the desired location.
3. Use a spirit level to verify that the template is applied
levelled.
4. Use the drill template to mark the drill holes.
5. Drill the holes at the marked points.
6. Verify the drill holes.
Installing the mounting block
1. 
2. Attach the mounting block on the wall by using two
screws in the two bottom drill holes.
Mounting post: Install the post with the concrete
pedestal or metal pedestal (accessory):
1. Dig a hole of approx. 50x50cm with a depth of 65cm.
2. Place the concrete or metal pedestal in this hole.
3. Attach the post on the pedestal with four threaded
bolts M10x25 mm and the corresponding rings (ref.
image on the cover or the pedestal’s installation
manual).
4. Attach the mounting block with two screw bolts
M10x25 mm.
5. Attach the charging station on the post with two
screw threads M10x25 mm.
6. Attach the ground wire on the post with M4x12 mm
screws and an M4 washer.
7. Guide the ground wire through the concrete pedestal
and the base to the charging station.
8. Attach the cover plate to the post with the anti-theft
bolt M8 x 15 mm (ref. image 2).
9. 
level the surface.
10. Once completed, cover the area with a levelled
protection such as tiles.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ICU Eve at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ICU Eve in the language / languages: English as an attachment in your email.

The manual is 6,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ICU Eve

ICU Eve User Manual - German - 18 pages

ICU Eve User Manual - Dutch - 24 pages

ICU Eve User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info