30935
13
Zoom out
Zoom in
Previous page
1/47
Next page
4
BASIC OPERATION
9
Basic operation
q Turn the power ON.
w Push [TX]/[ ] after the countdown disap-
pears from the screen.
See Turning power ON/OFF on page at left.
e Push [+]/[ ] or []/[ ] several times to se-
lect the display range.
The screen range readout shows the maximum range of
the screen.
r Turn [GAIN]/[ ] to set 1 oclock position.
Clockwise rotation increases the gain.
Increased gain may increase screen noise.
t Turn [SEA]/[ ] to set the sensitivity time con-
trol for minimum.
y Turn [RAIN]/[ ] to set the rain clutter control
for minimum.
u Push [MODE]/[ ] to select one of Head-up;H
UP, Course-up;C UP, North-up;N UP or True Mo-
tion;TM screens.
C UP, N UP or TM can be selected only when bear-
ing, position or speed data are connected.
(See p. 39 for details)
NOTE:
Manual adjustment can be used. (See below.)
TX
SAVE
TARGET TRAILS
MODEALM
+
-
MOB
MENU
EBL2
VRM2
EBL1
VRM1
BRILL
ZOOM
OFF CENT
PI
HL OFF
GAIN
SEA
RAIN
POWER
e
q
w
u
r
t
y
e
q
w
u
r
t
y
CAUTION: When setting the [SEA]/[ ] control to
a fully clockwise position, close targets are blanked.
D Heading marker
The heading marker is a line that shows your ships
bow direction. (This marker will appear in the center of
the screen when the Head-up screen H UP is se-
lected.) The heading marker can be hidden when the
desired target is located under the heading marker.
Push and hold [BRILL]/[ ] and [MENU]/[ ] simulta-
neously to hide the heading marker.
D Fixed range rings
The xed range rings can be used for rough distance
measurement. (p. 14)
Push [MENU]/[ ] to open the FUNCTION menu,
then push [Ú] to select RING. Push [≈] to turn the ring
ON.
D Manual tuning
The receiver tuning can be manually adjusted.
Push [MENU]/[ ] to open the VIDEO menu, then
select MANUAL. Push [Ú] to activate the manual tun-
ing slider, then push [≈] to set the tuning level indi-
cator to the maximum level. (p. 6)
•“M.TUNE appears on the top of the display.
D Brilliance adjustment
The intensity of the screen can be adjusted. When you
require continuous operation, but not constant viewing,
a lower setting can increase the life of the CRT display.
Key illumination
The backlighting of the keys can be adjusted for con-
venient operation. (p. 7)
Push [MENU]/[ ] four times to call up the INT. SET-
TING menu. Push [Ω ≈] to select the illumination level.
Key illumination corresponds with [BRILL]/[ ] control.
NOTE: High intensity will shorten the life of the CRT
display.
MR-1000R2_T2.qxd 04.2.24 10:22 Page 9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom MR1000TII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom MR1000TII in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info