30933
40
Zoom out
Zoom in
Previous page
1/47
Next page
Continued, reliable operation of the radar depends on how you care for your equipment. The simple maintenance
tips that follow can help you save time and money, and avoid premature equipment failures.
Periodic maintenance
q Keep the equipment as clean as possible.
Use a soft cloth to remove dirt, dust and water.
w Check all hardware for loose screws, bolts, etc.
e Check cables and terminal connections.
Scanner unit maintenance
D Cleaning
q Wipe the surface of the scanner with a clean soft
cloth.
DO NOT use strong solvents such as benzene or alco-
hol.
w Check that there is no drift or caked salt.
A heavy deposit of dirt or caked salt on the painted sur-
face of the upper scanner unit will cause a considerable
drop in radar performance.
e Check for cracks or deterioration of the rubber
packing and replace it if necessary.
D Painting (MR-1000TII only)
To prevent the corrosion, paint the surface of the
scanner body (except the antenna unit) twice a year
or more.
D Mounting
Check the mounting bolts of the scanner unit and
tighten if necessary.
Display unit maintenance
D Cleaning
Dirt on the CRT will, in time, leave a lm of contami-
nates which tend to dim the picture.
q Wipe the surface of the display unit with a clean soft
cloth.
DO NOT use strong solvents such as benzene or alco-
hol.
w If the picture is still dim, clean the CRT screen.
Options
OPC-1077 SYSTEM CABLE
Allows you to install the display unit and scanner up to 20 m (65
5
8 ft) apart.
OPC-1078 SYSTEM CABLE
Allows you to install the display unit and scanner up to 30 m (98
7
16 ft) apart.
WARNING: BE SURE the power is OFF before
working on the radar.
WARNING: BE SURE the power is OFF before
working on the radar.
WARNING: BE SURE the power is OFF before
performing any maintenance.
13
36
MAINTENANCE
MR-1000R2_T2.qxd 04.2.24 10:22 Page 36
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom MR1000RII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom MR1000RII in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info