Manual Icom MR1000RII (page 7 of 47) (English)

30933

Zoom out

Zoom in

1/47

PANEL DESCRIPTION

o EBL2 (VRM2) SWITCH [EBL2 (VRM2)]

/[ ] (pgs. 15–16)

Push to display the electronic bearing line 2 (EBL2)

and the variable range marker 2 (VRM2), and acti-

vate the [Ω≈] for the electronic bearing line selec-

tor and [Ù Ú] for the range marker selector.

• When the VRM1 and EBL1 ($9 %2) are displayed, the

center of VRM2 appears at the intersection point of the

VRM1 and EBL1.

!0 PARALLEL INDEX LINE FUNCTION [PI]/[ ]

Push [EBL1]/[ ] and [EBL2]

/[ ] simultaneously to toggle the paral-

lel index line ON and OFF.

• Push [Ω≈] keys to rotate the lines, and push [Ù Ú]

keys to adjust the line spaces.

!1 MENU SWITCH [MENU]/[ ] (pgs. 6–7)

Push [MENU]/[ ] to toggle the VIDEO, FUNC-

TION, ATA, INT. SETTING and SERVICE MAN

menu. Push [Ù Ú] keys to select the items and

push [Ω≈] keys to change the setting.

!2 HEADING LINE OFF FUNCTION [HL OFF]

/[ ] (p. 9)

Push [BRILL]/[ ] and [MENU]/[ ] simultane-

ously to turn off the heading line temporarily.

!3 GAIN CONTROL [GAIN]/[ ] (p. 9)

Adjusts the receiver ampliﬁer gain.

• Clockwise rotation increases the gain

• Increased gain may increase screen noise.

!4 SEA CLUTTER CONTROL [SEA]/[ ]

(p. 10)

This function serves to eliminate echoes from the

waves at close range.

Reduces the receiver gain for close objects within

a radius of 8 nautical miles (approx.) to eliminate

sea clutter.

Rotate the control fully clockwise to activate the au-

tomatic SEA control function. SEA indicator (@6) ap-

pears in the upper left of the screen.

• Under normal conditions set the SEA to a minimum.

• Use this control with caution when the sea is rough.

!5 RAIN CLUTTER CONTROL [RAIN]/[ ]

(p. 10)

This function eliminates reﬂection echoes from rain,

snow, fog, etc.

Rotate the control fully counter clockwise to deacti-

vate the RAIN function.

RAIN indicator (@8) disappears.

!6 MAN OVERBOARD [MOB]/[ ]

Push to mark the man overboard point on the

screen. When a crew member falls overboard, push

[MOB]/[ ] for 1 sec. to display the MOB symbol

( ) on the screen.

• MOB readout shows the bearing, distance and esti-

mated time to the MOB point with current speed.

• Push [MOB]/[ ] for 1 sec. to cancel the function.

• Position and bearing data are necessary.

!7 TARGET SWITCH [ATA]/[ ] (pgs. 18–20)

A setup of target caught by ATA (up to 10 targets

can be set).

• Push [Ù Ú Ω ≈] to move the cross cursor on the echo

which you want to plot on the screen before turning the

function ON.

• Select “ATA” function ON in the “ATA” menu, set the ap-

propriate No. DISP, VECT, OWN VECT, ALARM, CPA

LIMIT and TCPA LIMIT setting.

!8 ALARM SWITCH [ALM]/[ ] (p. 17)

Push [ALM]/[ ] to toggle the alarm function ON

and OFF.

Push and hold [ALM] for 1 sec. to enter the alarm

area setting condition.

• Push [Ù Ú Ω ≈] to move the cross cursor to the zone

starting point, then push [ALM] for 1 sec. The starting

ring of the zone is created. Then push [Ù Ú Ω ≈] to ﬁx

the ﬁnish point, the desired alarm zone will automatically

form.

!9 EBL1 (VRM1) SWITCH [EBL1 (VRM1)]

/[ ] (pgs. 15–16)

Push to display the electronic bearing line 1 (EBL1)

and the variable range marker 1 (VRM1) and acti-

vate the [Ω≈] for the electronic bearing line selec-

tor, and [ÙÚ] for the range marker selector.

• EBL1 bearing and VRM1 distance are displayed, in the

bottom window.

• When EBL1 and VRM1 are displayed, the beginning of

EBL2 appears at the intersection point of EBL1 and

VRM1.

@0 DISPLAY BRILLIANCE SWITCH [BRILL]/[ ]

(p. 9)

➥Push to increase or decrease the brilliance of the

picture on the display.

➥Push for 1 sec. to select the maximum brilliance.

• The brightness of the symbol, character and illumi-

nation can be adjusted in the “SYMBOL”, “CHAR-

ACTER” and “KEY ILLUM” of the INT. SETTING

menu independently.

MR-1000R2_T2.qxd 04.2.24 10:22 Page 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom MR1000RII in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom MR1000RII Manual

Product: