665008
24
Zoom out
Zoom in
Previous page
1/108
Next page
14
4
BASIC OPERATION
Receiving and transmitting
CAUTION: Transmitting without an antenna will damage
the transceiver.
Hold down [PWR](Dial) to turn ON the power. q
Set the audio and squelch levels. (p. 15) w
First, open the squelch. Then, adjust the audio output
level. After that, adjust the squelch level until the noise
just disappears.
Change the channel group. (p. 12) e
Push [ r ]/[] to select a channel. (pp. 11, 12)
•Pushing[Y]/[Z] on the microphone selects only Favorite chan-
nels.
•When receiving a signal, is displayed and audio is
heard.
•Furtheradjustmentofthevolumelevelmaybenecessary.
Push [LO/DX] to turn the receive Attenuator function ON t
or OFF, if necessary.
•ForonlyU.S.A.andAustralianversiontransceivers.
•“LOCAL is displayed when the receive Attenuator function is
ON.
Push [HI/LO] to select the output power, if necessary. y
•Pushing[H/L]or[HI/LO]onthemicrophonealsoselecttheout-
put power.
•“25W” is displayed when high power is selected, and “1W” is
displayed when low power is selected.
•Chooselowpowerforshortrangecommunications,choosehigh
power for longer distance communications.
•Somechannelsareforonlylowpower.
Hold down [PTT] to transmit, then speak at your normal u
voice level.
• ” is displayed.
•Channel70cannotbeusedfortransmissionotherthanDSC.
Release [PTT] to receive. i
Information
The Noise Cancel function reduces random noise components
in the transmit and/or receive signal. See page
78
for details.
Simplex channels, 3, 21, 23, 61, 64, 81, 82, and 83 CAN-
NOT be lawfully used by the general public in U.S.A. wa-
ters.
IMPORTANT: To maximize the readability of your transmit-
ted signal, pause a few seconds after pushing [PTT], hold
the microphone 5 to 10 cm (2 to 4 inches) from your mouth
and speak at a normal voice level.
NOTE for the TOT (Time-out Timer) function
The TOT function inhibits continuous transmission beyond a
preset time period after the transmission starts.
10 seconds before transmission is cutoff, a beep sounds to
indicate the transmission will be shut down and “TOT” is dis-
played in the channel name field. Transmission is not possible
for 10 seconds after this shut down.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom iM424G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom iM424G in the language / languages: English as an attachment in your email.

The manual is 6,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info