665005
27
Zoom out
Zoom in
Previous page
1/100
Next page
17
5
SCAN OPERATION
Setting Favorite channels
For more efficient scanning, add desired channels as Favor-
ite channels, or clear the Favorite on unwanted channels.
Channels that are not tagged will be skipped while scanning.
Favorite channels can be independently assigned to each
channel group (INT, USA, CAN, ATIS, or DSC).
Select the desired channel group. (p. 10) q
Select the desired channel to be set as a Favorite channel. w
Push [ e ] to set the displayed channel as a Favorite channel.
•“ is displayed on the display.
To cancel the Favorite channel setting, repeat step r e.
•“ disappears.
Clearing (or setting) all Favorite channels
Hold down [] for 3 seconds (until a long beep changes to
2 short beeps) to clear all Favorite channel settings in the
selected channel group.
•RepeataboveproceduretosetallchannelsasFavoritechannels.
Starting a scan
First, set the scan type (Priority or Normal scan) and scan
resume timer in the Menu screen. (p. 70)
Select the desired channel group. (p. 10) q
Set the Favorite channels, as described to the left. w
Make sure the squelch is closed to start a scan. e
Push [SCAN] to start a Priority or Normal scan. r
•“SCAN 16”is displayed during a Priority scan;“SCAN” isdis-
played during a Normal scan.
•Whenasignalisdetected,thescanpausesuntilthesignaldis-
appears, or resumes after pausing 5 seconds, depending on the
setting. (Channel 16 is still monitored during a Priority scan.)
•Push[Y]/[Z] on either transceiver or microphone, to check the
scanning Favorite channels, change the scanning direction or
manually resume the scan.
•Abeeptonesoundsand“16”blinkswhenasignalisreceivedon
Channel 16 during a Priority scan.
To stop the scan, push [CLEAR] or repeat step t r.
Scan starts. When a signal is received.
Push
[SCAN]
[Example]: Starting a Normal scan.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom iM324G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom iM324G in the language / languages: English as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info