665004
15
Zoom out
Zoom in
Previous page
1/100
Next page
5
2
PANEL DESCRIPTION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
!3 KEY ICON (p. 6)
Shows the preset function of the softkeys on the front pan-
el.
!4 TIME ZONE INDICATOR
Shows the current time when GPS data is received, or
the time is manually entered.
•WhentheGPScurrenttimeisinvalid,“??”willblinkevery2
seconds instead of current time. After 23.5 hours has passed,
“NO TIME” is displayed.
•“??”willblinkevery2 secondsinstead ofthe currenttime,
after 4 hours have passed from the time when the time was
manually entered. The manually entered time is held for only
23.5 hours, and after that, “NO TIME” is displayed.
“LOCAL is displayed when the offset time is set.
“MNL is displayed when the time is manually entered.
“UTC” is displayed when the GGA, GLL, and GNS GPS
sentence format is included in the GPS signal.
The date information is displayed when the RMC GPS
sentence format is included in the GPS signal.
“NO TIME” is displayed when no GPS receiver is con-
nected, and no time is manually entered.
NOTE for the IC-M323 and IC-M324:
These models do not come with a built-in GPS receiver.
Therefore an external GPS receiver needs to be con-
nected, or the time needs to be manually entered for
the time zone indicator to be displayed.
!5 POSITION INDICATOR
Shows the current position when position data is re-
ceived, or the position is manually entered.
•Whenthepositiondataisinvalid,“??”mayblinkevery2sec-
onds instead of position. The last position is held for only
23.5 hours, and after that, “NO POSITION” is displayed.
•“??” will blink every 2 seconds instead of position, after 4
hours have passed from the time when the position is manu-
ally entered. The manually entered position is held for only
23.5 hours, and after that, “NO POSITION” is displayed.
“NO POSITION” is displayed when no GPS receiver is
connected, and no position is manually entered.
!6 SCAN INDICATOR
“SCAN 16” is displayed during a Priority scan; “SCAN”
is displayed during a Normal scan. (p. 17)
“DUAL 16” is displayed during Dualwatch; “TRI 16” is
displayed during Tri-watch. (p. 18)
!7 LOCAL ICON (p. 12)
Displayed when the Attenuator function is turned ON.
*For only U.S.A. and Australian version transceivers.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom iM324 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom iM324 in the language / languages: English as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info