Manual Icom iF1721 D (page 29 of 36) (English)

464223

Zoom out

Zoom in

1/36

BIIS OPERATION

■ Stun function

When the speciﬁed ID, set as a killer ID, is received, the stun

function is activated.

When the killer ID is received, the transceiver switches to the

password required condition. Entering of the password via the

keypad is necessary to operate the transceiver again in this

case.

■ BIIS indication

The following indications are available for the BIIS operation

on an MSK channel.

CONNECT : Individual/group call is successful.

OK : Message (status or SDM) transmission is suc-

cessful.

FAILED : No answer back is received.

WAIT : Appears during retry of the call (2nd call).

CLR DOWN : End the communication.

BUSY : Operating channel is in the busy condition.

■ Priority A channel selection

When one of the following operations is performed, the trans-

ceiver selects the Priority A channel automatically.

Priority A is selected when;

• Clear down signal is received/transmitted

- Set the ‘Move to PrioA CH’ item as ‘Clear down.’

• Turning the power ON

The Priority A channel is selected each time the transceiv-

er power is turned ON.

• Status call

The Priority A channel is selected when transmitting a sta-

tus call.

- Enable the ‘Send Status on PrioA CH’ item in the MSK

conﬁguration.

■ Horn output

Automatic honking function is available when the optional

OPC-617

ACC CABLE

is connected. When a status message

is received, the transceiver controls the vehicles horn for the

speciﬁed time period to inform a status message is received.

This function is convenient when the operator away from the

transceiver.

Ask your dealer or system operator, or refer to the service

manual for connection and setting details.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom iF1721 D in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom iF1721 D Manual

Product: