689584
36
Zoom out
Zoom in
Previous page
1/56
Next page
New2001
35
New2001
TROUBLESHOOTING
8
To communicate through the repeater, your signal must access to the repeater. When your signal accesses your local repeater,
but it is not sent to the destination repeater, the repeater replies with an status message.
PROBLEM POSSIBLE CAUSE SOLUTION REF.
After your call, the repeater does
not return a status reply.
•Therepeatersettingiswrong.
•Yourtransmissiondidnot reachthe repeat-
er.
•Selectthecorrectrepeater.
•Correct the repeater frequency, frequency
offset, or duplex setting.
•Waituntilyouareclosertotherepeaterand
try again.
•Trytoaccessanotherrepeater.
p. 17
After your call, the repeater re-
plies ‘UR?’ and its call sign.
•Thecallwassuccessfullysent,butnostation
immediately replied.
•Waitforawhile,andtryagain.
After your call, the repeater re-
plies ‘RX’ or ‘RPT?’ and the ac-
cess repeater’s call sign.
•Yourowncallsign(MY)hasnotbeenset.
•Your own call sign (MY) has not been reg-
istered on a gateway repeater, or the regis-
tered contents do not match your transceiv-
er’s setting.
•Setyourowncallsign(MY).
•Registeryourowncallsign(MY)onagate-
way repeater, or confirm the registration of
the call sign.
p. 2
p. 4
After your call, the repeater re-
plies ‘RPT?’ and call sign of the
destination repeater.
•Therepeatercannotconnecttothedestina-
tion repeater.
•Therepeateris busy.
•
Checktherepeatersetting.
•
Wait for a while, and try it again.
p. 17
After your call, the access repeat-
er replies ‘RPT?’ and its call sign.
•The call sign of the destination repeater is
wrong.
•Correctly set the destination repeater call
sign.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom ID-51E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom ID-51E in the language / languages: English as an attachment in your email.

The manual is 7,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Icom ID-51E

Icom ID-51E User Manual - English - 413 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info