689584

Icom ID-51E Manual

370
Zoom out
Zoom in
Previous page
1/413
Next page
17 OTHER FUNCTIONS
17-16
■Tone squelch operation
DDTCS code setting and operation (Continued)
iPush [MENU] to exit the MENU screen.
oPush [QUICK] .
!0 Push D-pad() to select “TONE,” and then push D-
pad(Ent).
D-pad
()
(Ent)
!1 Push D-pad() to select the tone squelch type.
• DTCSS: Enables the DTCS squelch with the Pocket
Beep function.
• DTCS: Enables the DTCS Squelch function.
• DTCS-R:
Enables the Reverse DTCS Squelch function.
• DTCS(T): (“DTCS” blinks)
When you transmit, the selected DTCS code
is superimposed on your normal signal.
When you receive, the function is OFF.
• TONE(T)/DTCS(R): (“T-DTCS” appears, and “T” blinks.)
When you transmit, the selected subaudible
tone is superimposed on your normal signal.
When you receive, the DTCS squelch opens
only for a signal that includes a matching
DTCS code and polarity. (Audio is heard)
• DTCS(T)-TSQL(R): (“D-TSQL” appears, and “D” blinks.)
When you transmit, the selected DTCS code
is superimposed on your normal signal.
When you receive, the tone squelch opens
only for a signal that includes a matching
tone frequency. (Audio is heard)
!2 Push D-pad(Ent) to set the DTCS squelch function,
and then close the QUICK Menu screen.
!3 Holding down [PTT] and call a desired station.
• Operate in the normal way.
Continued from step u on the previous page.
Appears.
• When reversed tone
squelch is selected
in step !1, “DTCS-R”
icon appears.
TIP: Sounds beep when a call is received.
If “DTCSS” is selected in step !1, beeps sound
for 30 seconds and the icon “S” blinks when a call
with the matched DTCS code signal is received.
➥ After receiving a call, hold down [PTT] within
30 seconds then start conversation, or push
D-pad(Ent) to cancel the pocket beep function
(“S” icon disappears). After that, the transceiv-
er selects regular DTCS squelch operation. If no
operation is performed within 30 seconds, beeps
stop sounding but the “S” icon blinking remains.
Beep, Beep, Beep...
When a call with “TSQLS”
is received.
Previous view
… 370 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom ID-51E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom ID-51E in the language / languages: English as an attachment in your email.

The manual is 66,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Icom ID-51E

Icom ID-51E Quick start guide - English - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info