Manual Icom ICM502D (page 71 of 74) (English)

30899

Zoom out

Zoom in

1/74

HM-127 REMOTE-CONTROL MICROPHONE

■ Installation

The optional HM-127 can be connected to the transceiver di-

rectly, as well as via the supplied connection cable for longer

distance remote operation. The connector of the connection

cable can be installed into a cabinet, wall, etc., as a built-in

plug.

For longer distance remote operation, the optional extension

cable, OPC-999 (6 m; 20 ft/connecting between transceiver

and the connection cable), is available, and up to 2 OPC-999

can be added.

q Insert the supplied cable into the external microphone jack

and tighten the cable nut as shown below.

w To use the supplied cable as a wall socket, follow the

below steps.

e Using the mounting base, carefully mark off the 2 spots

where the cable and screws will be fastened.

r Drill holes at these marks.

t Install the mounting base using the supplied screws as

shown below.

y The completed installation should look like this.

Gasket

Cap

Mounting base

Nut

Screw holes

(approx. 2 (d) mm;

⁄32″)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom ICM502D in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom ICM502D Manual

Product: