Manual Icom ICM502D (page 52 of 74) (English)

30899

Zoom out

Zoom in

1/74

CONNECTIONS AND MAINTENANCE

■ Optional unit installation

CAUTION: DISCONNECT the DC power cable from the

transceiver before performing any work on the transceiver.

Otherwise, there is danger of electric shock and/or equip-

ment damage.

Follow the case opening procedure shown here when you

want to install an optional unit.

q Remove the 6 screws as shown below and open the trans-

ceiver.

w Remove the 4 screws from the shielding plate, then lift up

the shielding plate.

e Plug an optional unit (UT-98 or UT-112) to J3 on the MAIN

unit as shown below.

r Return the shielding plate and assemble the units to their

original positions.

CAUTION:

• When re-assembling the case and tightening the screws,

you must keep the speciﬁed torque (0.7±0.1 N.m). Oth-

erwise the transceiver may be damaged (torque too high)

or lose waterproof efﬁciency (torque too low).

• When uninstalling the optional unit, remove it vertically.

Wiggling the unit from side to side may damage the op-

tional unit's connector.

Optional unit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom ICM502D in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom ICM502D Manual

Product: