scrambler unit is installed.
when using HM-127.
■ Set mode programming
Set mode is used to change the conditions of the trans-
ceiver’s functions: scan mode (Normal or Priority), scan re-
sume timer, weather alert, Dualwatch/Tri-watch selection,
DSC watch, transceiver’s beep tone (transceiver or HM-127),
internal speaker, LCD contrast (transceiver or HM-127), RF
attenuation level, scrambler code, scrambler type and auto-
matic acknowledgement.
•Available functions may differ depending on dealer set-
ting.
•The optional HM-127 has it’s own settings for the beep
tone and LCD contrast.
q Turn power OFF.
w While pushing
[
[
9
9
]
], turn power ON to enter Set mode.
e After the display appears, release
[
[
9
9
]
].
r Push
[
[
9
9
]
] to select the desired item.
Or push
[
[
]
]
(
(
9
9
)
) on the HM-127 to select the item when
using an optional HM-127.
t Rotate
[
[
CHANNEL
CHANNEL
]
] to select the desired condition of the
item. Use
[
[
YY
YY
]
]
/
[
[
ZZ
ZZ
]
] when using an optional HM-127.
y Turn power OFF, then turn ON again to exit Set mode.
16
16
16
16
16
16
16
16
• SET MODE CONSTRUCTION