30899

Icom ICM502D Manual

9
Zoom out
Zoom in
Previous page
1/74
Next page
y ATTENUATOR/INTERCOM/SCRAMBLER KEY
[
[
LO/DX
LO/DX
]
]
(
(
SCR)
SCR)
➥ Toggles the Attenuator function ON or OFF when
pushed momentarily. (p. 8)
•“LOCAL” appears when the Attenuator is in use. The order of
indication precedence is “SP OFF,” “LOCAL” and “CALL.”
➥ Activates an optional Intercom function when pushed for
1 sec. (p. 36)
➥ Calls optional HM-127
REMOTE-CONTROL MICROPHONE
when pushed and held while in Intercom mode. (p. 36)
➥ While pushing
[
[
HI/LO
HI/LO
]
], activates an optional Voice
scrambler function. (p. 10)
•The optional Voice scrambler function cannot be used on
Channel 16 and 70.
u CHANNEL 16/CALL CHANNEL KEY
[
[
9
9
]
]
➥ Selects Channel 16 when pushed. (p. 6)
➥ Selects call channel when pushed for 1 sec. (p. 6)
•“CALL” appears when call channel is selected. “SP OFF”
and “LOCAL” indications have priority.
➥ Push for 3 sec. to enter call channel programming con-
dition when call channel is selected. (p. 9)
➥ While pushing
[
[
HI/LO
HI/LO
]
], enters channel comments pro-
gramming condition. (p. 9)
➥ Enters Set mode when pushed while turning power ON.
(p. 38)
i DISTRESS KEY
[
[
DISTRESS
DISTRESS
]
]
Transmits Distress call when pushed for 5 sec. (p. 18)
o CHANNEL/DUALWATCH/TRI-WATCH KEY
[
[
CH/WX
CH/WX
]
]
(
(
U/I/C)
U/I/C)
➥ Selects and toggles the regular channels and weather
channel when pushed momentarily. (p. 7)
➥ While pushing
[
[
HI/LO
HI/LO
]
], selects one of 3 regular chan-
nels in sequence when pushed. (p. 7)
•International, U.S.A. and Canadian channels are available for
regular channels.
➥ Starts Dualwatch or Tri-watch when pushed for 1 sec.
(p. 11)
➥ Stops Dualwatch or Tri-watch when either is activated.
!0 SCAN KEY
[
[
SCAN
SCAN
]
]
(
(
)
) (p. 13)
➥ Starts and stops Normal or Priority scan when tag
(scanned) channels are programmed.
➥ Push
[
[
SCAN
SCAN
]
]
(
(
)
) for 1 sec. to set or cancel the dis-
played channel as a tag (scanned) channel.
➥ While pushing
[
[
HI/LO
HI/LO
]
], push for 3 sec. to clear or set
all tag channels.
!1 DSC/POSITION KEY
[
[
DSC/ENT
DSC/ENT
]
]
(
(
)
)
➥ Selects the DSC menu when pushed. (p. 14)
➥ Shows current position and time from a GPS receiver,
etc. when pushed for 1 sec. (p. 17)
POS
TAG
TAG
DW
16
16
IC
PANEL DESCRIPTION
3
2
2
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom ICM502D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom ICM502D in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info