Manual Icom IC-W32A 32E (page 16 of 49) (English)

12842

Zoom out

Zoom in

1/49

■ Power ON

q Charge the battery pack or

install alkaline batteries into

the battery case. (pgs. 9,

10)

w Push and hold [POWER]

for 2 sec. to turn power ON.

•Remaining battery voltage is

displayed for 2 sec. (p. 34)

•The display shows the approx. voltage

in 0.5 V steps.

•When the battery voltage is lower than

4.5 V, “LOW V” appears. Charge the

battery pack or place new dry cells in

the battery case in this case.

•If “OVER V” appears, UNPLUG the ex-

ternal DC plug immediately. Connected

voltage is over 16 V and could damage

the transceiver.

FREQUENCY AND CHANNEL SETTING

■

VFO and memory/call channels

This transceiver has 2 normal operating modes: VFO mode

and memory mode.

VFO mode is used for setting a desired frequency within the

band range.

➥Push [VFO] to select VFO mode.

Memory (call) mode is used for operation of memory (call)

channels which have programmed frequencies.

➥Push [MR] to select memory

mode.

•To program a memory, refer to p. 22.

➥Push [CALL] to select a call chan-

nel.

What is VFO?

VFO is an abbreviation of Variable Frequency Oscillator.

Frequencies for transmitting and receiving are generated and

controlled by the VFO.

MAIN

“M” (or a memory name)

appears.

MAIN

“C,” “VHF CALL” or

“UHF CALL” appears.

Push for

2 sec.

for 2 sec.

POWER

after 2 sec.

MAIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-W32A 32E in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-W32A 32E Manual

Product: