12826

Icom IC-V8000 Manual

85
Zoom out
Zoom in
Previous page
1/88
Next page
■ Specifications
GENERAL
• Frequency coverage : (unit: MHz)
USA Tx: 144–148/Rx: 136–174*
Asia, CSA Tx: 144–148/Rx: 136–174*
(Central South America)
Australia Tx/Rx: 144–148
Taiwan, Korea Tx/Rx: 144–146
*Guaranteed: 144–148 MHz range only.
• Type of emission : FM
• Number of memory channels : 207 (incl. 6 scan edges and 1 call)
• Frequency resolution : 5, 10, 12.5, 15, 20, 25, 30, 50 kHz
• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F
• Frequency stability : ±10 ppm
(–10°C to +60°C)
• Power supply requirement : 13.8 V DC ±15%
• Current drain (at 13.8 V DC: approx.):
Transmit at 75 W 15 A
Receive standby 0.3 A typical
max. audio 1.0 A
• Antenna connector : SO-239 (50 Ω)
• Dimensions (proj. not included) : 150(W) × 50(H) × 150(D) mm
5
29
⁄32(W)×2(H)×5
29
⁄32(D) in
• Weight (approx.) : 1.1 kg; 2 lb 7 oz
TRANSMITTER
• Modulation system : Variable reactance frequency mod.
• Output power : 75/25/10/5 W* (approx.)
*24/10/5 W only for the Taiwan version.
• Max. frequency deviation : ±5.0 kHz (wide)/±2.5 kHz (narrow)
†
• Spurious emissions : Less than –60 dB
• Microphone connector : 8-pin modular (600 Ω)
RECEIVER
• Receive system : Double-conversion superheterodyne
• Intermediate frequencies : 1st: 21.7 MHz, 2nd: 450 kHz
• Sensitivity (at 12 dB SINAD) : 0.15 µV typical
• Squelch sensitivity (threshold) : 0.08 µV typical
• Selectivity (typical) : 75 dB (wide)/60 dB (narrow)
†
• Spurious and image rejection : 75 dB typical
•
AF output power (at 13.8 V DC)
: More than 2.0 W at 10% distortion with
an 8 Ω load
• Ext. speaker connector : 3-conductor 3.5 (d) mm (
1
⁄8″)/8 Ω
†
Some versions only.
All stated specifications are subject to change without notice or obligation.
■ Options
UT-108
DTMF DECODER UNIT
HM-95/HM-118TAN/TN
DTMF MICROPHONES
HM-118N
HAND MICROPHONE
HM-133V
REMOTE
-
CONTROL MICROPHONE
SP-10
EXTERNAL SPEAKER
OPC-440/OPC-647
MIC EXTENSION CABLES
OPC-441
SPEAKER EXTENSION CABLE
OPC-1132/OPC-347
DC POWER CABLES
OPC-589
ADAPTER CABLE
CS-V8000
CLONING SOFTWARE
+ OPC-478
CLONING CABLE
OPC-474
CLONING CABLE
74
14
SPECIFICATIONS AND OPTIONS
13
14
… 85 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-V8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-V8000 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info