Manual Icom IC-V8000 (page 78 of 88) (English)

12826

Zoom out

Zoom in

1/88

12 OTHER FUNCTIONS

■ Microphone keys

The supplied HM-133V’s (optional for some versions) [F-1]

and [F-2] keys memorize the transceiver conditions.

The [UP]/[DN] keys of the standard or an optional microphone

(other than the HM-133V) can be assigned functions like the

function keys on the transceiver’s front panel.

[F-1]/[F-2] keys on HM-133V

The following conditions can be memorized into [F-1] and

[F-2] keys, independently.

• Operating frequency

• Repeater setting

(offset direction and frequency, tone

ON/OFF and frequency)

• Tone/DTCS squelch

(ON/OFF, frequency/code and polarity)

• Transmit output power selection

• Set mode settings

• Initial set mode settings

(except display type item)

➥ Programming the condition

Set the desired contents of each condition,

then push [F-1]/[F-2] for 1 sec.

• 3 beeps sound.

➥ Re-calling the condition

Push [F-1]/[F-2] momentarily.

[UP]/[DN] keys on a microphones

(other than HM-133V)

The following functions are assigned to the [UP]/[DN] keys on

the other microphones (HM-118N/TAN, etc.) when ﬁrst apply-

ing power.

[UP] : channel up; push and hold to start scan, push again

to stop scan.

[DN] : channel down; push and hold to start scan, push

again to stop scan.

➥ Assigning a function

q Turn the power OFF.

w While pushing the desired switch on the transceiver and

one of either [UP]/[DN] keys on the microphone, turn the

power ON.

• The function is programmed into the key.

➥ Clearing an assignment

q Turn the power OFF.

w While pushing the desired [UP] or [DN] key on the micro-

phone, turn the power ON.

POWER ON

[F-1]/[F-2]

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-V8000 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-V8000 Manual

Product: