Manual Icom IC-V8000 (page 71 of 88) (English)

12826

Zoom out

Zoom in

1/88

OTHER FUNCTIONS

Offset frequency

Sets the duplex offset frequency within 0 to 20 MHz range.

During duplex (repeater) operation, transmit frequency (or re-

ceive when reverse function is set to ON) shifts the set fre-

quency. (default value may differ depending on versions)

Reverse mode

Sets the reverse function ON and OFF (default).

Tuning step

Selects tuning step from 5 (default), 10, 12.5, 15, 20, 25, 30

and 50 kHz for the tuning dial or [Y]/[Z] operation.

Scan resume timer

Selects scan resume timer from SCT-15 (default), SCT-10,

SCT-5 and SCP-2.

• SCT-15/10/5 : Scan pauses for 15/10/5 sec., then re-

sumes.

• SCP-2 : Pause on a signal until signal disap-

pears, then resumes 2 sec. after the sig-

nal disappears.

Transmit permission

Turns transmission permission ON and OFF. This function

can be set for each memory, call channel and VFO, indepen-

dently.

Transmission is permitted.

(default)

Transmission is inhibited.

Reverse function OFF (default) Reverse function ON

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-V8000 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-V8000 Manual

Product: