Manual Icom IC-V8000 (page 37 of 88) (English)

12826

Zoom out

Zoom in

1/88

MEMORY OPERATION

D Programming a memory channel via the microphone

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.

Push

Push then momentarily.

Push

Push then 1 sec. and continue to push

➠

Beep

“

The microphone can also be used to program mem-

ory channels.

z Set the desired frequency in VFO mode.

➥ Push [VFO/LOCK] to select VFO mode.

➥ Set the frequency using the keypad.

➥ Set other data

(e.g. offset frequency, duplex direction, sub-

audible tone encoder ON/OFF and its frequency), if neces-

sary.

x Push [FUNC] then [

CLR

A(MW)] momentarily.

c Select the memory channel to be programmed.

➥ Push [Y] or [Z] to select the memory channel

(direct nu-

meral input cannot be used).

v Push [FUNC] then [

CLR

A(MW)] for 1 sec. to program.

➥ 3 beeps may sound and the VFO contents (including

the subaudible tone frequency, etc.) are programmed.

➥ Memory channel number increases when continuing to

push [

CLR

A(MW)] after programming.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-V8000 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-V8000 Manual

Product: