Manual Icom IC-V8000 (page 33 of 88) (English)

12826

Zoom out

Zoom in

1/88

REPEATER OPERATION

■ Reversed duplex mode

When the reversed duplex mode is selected, the receive fre-

quency shifts.

(Transmit frequency shifts in normal duplex mode.)

Each receive and transmit frequency is shown in the table

below with the following conditions;

Input frequency : 145.30 MHz

Direction : – (negative)

Offset frequency : 0.6 MHz

q Push [SET(LOCK)] to enter set mode.

w Push [SET(LOCK)] or [MW(S.MW)] several times until the

“REV” display appears as shown below.

e Rotate the tuning dial to turn the repeater lockout function

to ON or OFF.

r Push [TONE(T-SCAN)] to exit set mode.

z Push [

SET

B(D-OFF)] to enter set mode.

Push [

SET

B(D-OFF)] or [

ENT

C(T-OFF)] until

“REV” appears.

c Push [Y] or [Z] to set the reversed duplex

mode ON and OFF.

v Push [

CLR

A(MW)] to exit set mode.

Push

SET

Reverse duplex mode is

turned ON.

USING

SET MODE

Reversed OFF ON

Rx frequency 145.30 MHz 144.70 MHz

Tx frequency 144.70 MHz 145.30 MHz

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-V8000 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-V8000 Manual

Product: