Manual Icom IC-V8000 (page 20 of 88) (English)

12826

Zoom out

Zoom in

1/88

SETTING A FREQUENCY

■ Preparation

D Turning power ON/OFF

➥ Push [PWR] for 1 sec. to

turn power ON and OFF.

D VFO mode selection

The transceiver has 2 basic operating modes: VFO mode and

memory mode.

➥ Push [V/MHz(SCAN)] to

select VFO mode.

➥ Push [VFO/LOCK] to select VFO mode.

■ Using the tuning dial

qRotate the tuning dial to set the frequency.

• If VFO mode is not selected,

push [V/MHz(SCAN)] to select

VFO mode.

• The frequency changes ac-

cording to the selected tuning

steps. (p. 11)

wTo change the frequency in 1 MHz (10 MHz for some ver-

sions) steps, push [V/MHz(SCAN)], then rotate the tuning

dial.

• Pushing [V/MHz(SCAN)] for

1 sec. starts scan function.

If scan starts, push

[V/MHz(SCAN)] again to can-

cel it.

The display shows that the

1 MHz tuning step is selected.

Tunig dial[V/MHz(SCAN)]

VFO/LOCK

Push [V/MHz(SCAN)]

Push [PWR] for 1sec.

Note that in this manual, sections beginning with a micro-

phone icon (as above), designate operation via the HM-

133V microphone.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-V8000 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Icom IC-V8000 Manual

Product: