12824
56
Zoom out
Zoom in
Previous page
1/80
Next page
40
9
SUBAUDIBLE TONES
Tone scan
By monitoring a signal that is being operated with a repeater, pocket
beep or tone squelch function, you can determine the tone fre-
quency necessary to access a repeater or open the squelch.
q Set the frequency to be checked for a tone frequency or code.
w Push [A
FUNC
], then push [1
TONE
].
Repeat several times to select the tone condition or type to be
scanned. (One of , “” or “” appears)
The tone scan can be operated even if the tone condition or type is
not selected.
e Push [A
FUNC
], then push [3
T
.
SCAN
] to start the tone scan.
To change the scanning direction, push [Y] or [Z].
r When the CTCSS tone frequency or DTCS code is matched, the
squelch opens and the tone frequency or code is temporarily
programmed into the selected mode such as memory or call
channel.
The tone scan pauses when a CTCSS tone frequency or 3-digit
DTCS code is detected.
The decoded CTCSS tone frequency or 3-digit DTCS code is used
for the tone encoder or tone encoder/decoder depending on the
selected tone condition or type in step w.
- No indication : Cannot be used for operation.
- “” : CTCSS tone encoder
- “” : CTCSS tone encoder/decoder
- “” : DTCS tone encoder/decoder
t Push [D
CLR
] to stop the scan.
MR
F
TX
MR
F
D
TX
D
D
IC-V8_New.qxd 03.2.6 10:20 Page 40 (1,1)
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-V8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-V8 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info