12796
54
Zoom out
Zoom in
Previous page
1/100
Next page
49
6
SCAN OPERATION
Scan notes
D Squelch setting
Scanning stops when the squelch opens. Make sure the
squelch is set to the threshold point or desired squelch level.
Rotate the tuning dial while pushing [SQL] to select auto-
matic squelch (AUTO) or a level (19) where the noise is
muted. (p. 22)
D Tuning dial operation while scanning
Scan starts in the upward direction. To change the scan-
ning direction, rotate [DIAL] clockwise or counterclockwise.
Rotating [DIAL] while a scan is posed, resumes the scan
manually.
D Tuning step setting while scanning
The tuning step set while scanning becomes the selected tun-
ing step. Reset the tuning step before scanning, if necessary.
(p. 18)
D Skip function
Memory channels can be set to be skipped for memory skip
scan. In addition, memory channels can be set to be skipped
for both memory skip scan and frequency skip scan. These
are useful to speed up the scan interval. (p. 47)
DWhen receiving a signal
The scan pauses according to the scan pause time (default:
10 sec.). It can be selected as a pause or timer scan
(220 sec.) in set mode. (p. 58)
The scan restarts after a signal disappears according to the
resume time (default: 2 sec.). It can be selected from 05 sec.
or hold (indenitely) in set mode. (p. 58)
DScan stop beep
A beep sounds when a scan stops to confirm the scan has
detected a signal. This function can be turned ON or OFF in
expanded set mode 1. (p. 62)
DScan stop LED
The keypad backlighting blinks when a scan stops to conrm
the scan has detected a signal. This function can be turned
ON or OFF in expanded set mode 1. (p. 62)
DBusy LED ON/OFF
The receive indicator can be turned ON or OFF in set mode.
(p. 59)
IC-T90A-1.qxd 02.7.24 03:36 PM Page 52 (1,1)
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-T90A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-T90A in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info