12796
46
Zoom out
Zoom in
Previous page
1/100
Next page
41
5
MEMORY/CALL CHANNELS
Memory bank
The transceiver has 500 memory channels that can be as-
signed to 18 banks for faster memory access, memory
arrangement, etc.
Each bank (AH, J, L, NR, T, U and Y) can be assigned up
to 100 memory channels.
Memory banks are used for arrangement of a memory
channel. When you edit the original memory channel con-
tents, the memory bank contents are updated automati-
cally.
DSetting a memory bank
q Push [MR] to select memory mode.
w Set the desired memory channel with [DIAL].
e Push [MR S.MW] for 1 sec. to indicate a memory channel.
Memory channel indicator blinks.
Do not hold [MR S.MW] for more than 2 sec., otherwise the pre-
viously selected VFO will be overwritten.
r Push [CALL/TV] several times to select BANK.
Memory bank screen appears.
Previously programmed memory bank appears, if programmed.
t Push [BAND] to select a memory bank.
Rotating the tuning dial while pushing [BAND] also selects the
memory bank.
Select -- -- -- -- to clear the memory bank information.
y Rotate the tuning dial to select the desired channel.
Previously used memory bank channel cannot be selected.
u Push [VFO] to program the memory bank channel.
000 51.000 MHz
001 145.000 MHz
002 433.000 MHz
003 145.120 MHz
004 435.340 MHz
005 145.040 MHz
006 433.560 MHz
007 850.480 MHz
008 52.560 MHz
009 1.620 MHz
010 50.140 MHz
011 118.200 MHz
012 76.500 MHz
013 118.125 MHz
014 145.540 MHz
015 369.850 MHz
016 434.720 MHz
017 848.98750 MHz
018 852.720 MHz
019 75.795 MHz
020 127.700 MHz
021 146.300 MHz
499 119.870 MHz
A0099 144 MHz Repeater*
B0099 440 MHz Repeater*
C0099 VHF air frequencies
D0099
E0099
F0099
G0099
H0099
J0099
L0099
N0099
O0099
P0099
Q0099
R0099
T0099
U0099
Y0099
Mch contents
Memory bank contents
A00
B00
A01
B01
C00
C01
A02
B02
C02
A03
C03
Memory bank
*Above sample is collected 144
MHz Repeater channels to bank A
and 440 MHz Repeater channels
to bank B.
IC-T90A-1.qxd 02.7.24 03:36 PM Page 44 (1,1)
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-T90A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-T90A in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info