12796
13
Zoom out
Zoom in
Previous page
1/100
Next page
8
2
PANEL DESCRIPTION
y PTT SWITCH [PTT]
Push and hold to transmit in 50/144/430 (440) MHz am-
ateur bands; release to receive. (p. 28)
When WFM or AM mode is selected, transmission is impossi-
ble.
u ANTENNA CONNECTOR (p. 3)
Connects the supplied antenna.
i EXTERNAL SPEAKER AND MICROPHONE JACKS
[SP/MIC]
Connects an optional speaker-microphone or headset, if
desired. The internal microphone and speaker will not
function when any external equipment is connected. (See
pgs. 89, 90 for a list of available options.)
o TUNING DIAL [DIAL]
Rotate [DIAL] to set operating frequencies, memory
channels, set mode contents, etc. (pgs. 19, 36, 55)
While pushing [SQL], sets the squelch level. (p. 22)
While pushing [BAND], sets the operating band in VFO
mode. (p. 21)
While pushing [Y]/[Z], adjusts the audio level (when
[Y]/[Z] and [DIAL] are not exchanged). (p. 17)
!0 EXTERNAL DC POWER JACK [DC 11.0 V]
Allows charging of the BP-217 using the BC-110A/D wall
charger, or using an optional CP-19R cigarette lighter
cable.
To connect regulated power supply with optional CP-
19R cigarette lighter cable.
!1 MODE/SCAN SWITCH [MODE SCAN]
Push to select the operating mode (FM, WFM,
AM). (p. 21)
Push for 1 sec. to start a scan. (p. 45)
While pushing [PTT], this key sends the DTMF code F (#).
!2 VFO SWITCH [VFO MHz]
Selects and toggles between VFO A and B.
(p. 20)
Selects and toggles between the 1 MHz or 10
MHz tuning steps when pushed for 1 sec.
(p. 18)
Returns to previous operating condition while setting fre-
quency or memory channel, or while in set mode.
While pushing [PTT], this key sends the DTMF code A.
!3 MEMORY SWITCH [MR S.MW]
Selects and toggles between memory mode
and memory bank. (p. 20)
Push for 1 sec. to enter memory write condi-
tion. (p. 37)
Push for 2 sec. to write the operating frequency into the
selected memory channel in VFO mode.
Keep pushing for 2 sec. or more to automatically select the
next memory channel, if desired. (p. 38)
Push [MR S.MW] for 2 sec. to transfer the displayed fre-
quency into the VFO in memory mode. (p. 38)
ww
PANEL DESCRIPTION
IC-T90A-1.qxd 02.7.24 03:36 PM Page 11 (1,1)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-T90A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-T90A in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info